Is there a way to reset the SRS light?
08-14-2003, 05:05 AM
#12
If it's like the Prelude, which I believe it is, this what you need to do...
Make my own SCS service connector with a switch (basically a jumper cable with a switch to open and close the connection). This is what mine looks like...
- I located the MES connector (it's yellow plug under the dash) and plug in my SCS connector with the switch on the 'on' position.
- Turn the ignition switch to ON II.
- The SRS light stayed on for 6 six then shut off.
- I turned the switch to the 'off' position within 4 seconds of the SRS light turning off.
- The SRS will appear again and I turned the switch back to the 'on' position within 4 seconds of the switch turning back on again.
- The SRS light will turn off and I turned the switch to the off position again within 4 seconds of the SRS light turning off.
- The SRS indicator light will blink 2 times which means the memory has been erased.
- Turn the ignition to the OFF position and wait 10 seconds.
It worked for me on my Lude. FAQ this!
Keith
Make my own SCS service connector with a switch (basically a jumper cable with a switch to open and close the connection). This is what mine looks like...
- I located the MES connector (it's yellow plug under the dash) and plug in my SCS connector with the switch on the 'on' position.
- Turn the ignition switch to ON II.
- The SRS light stayed on for 6 six then shut off.
- I turned the switch to the 'off' position within 4 seconds of the SRS light turning off.
- The SRS will appear again and I turned the switch back to the 'on' position within 4 seconds of the switch turning back on again.
- The SRS light will turn off and I turned the switch to the off position again within 4 seconds of the SRS light turning off.
- The SRS indicator light will blink 2 times which means the memory has been erased.
- Turn the ignition to the OFF position and wait 10 seconds.
It worked for me on my Lude. FAQ this!
Keith
08-28-2003, 05:42 AM
#13
Registered User
Join Date: Jul 2002
Location: Clarksville
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Could anyone please confirm that this procedure is identical/correct for the S2000? Also, will any low voltage switch work, or does it require something more specific? Thanks!
12-13-2005, 11:30 PM
#18
Registered User
Join Date: Jul 2004
Location: 9one6
Posts: 3,022
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 3ngin33r1,Oct 14 2003, 04:23 PM
thanks
01-05-2006, 05:00 AM
#19
If anybody knows how to reset the srs light, can they help me at the south florida meet in january. I tried reading the helms manual picture they have on how to do it on the site but the font is too small.
Thanks.
Thanks.