S2000 Talk Discussions related to the S2000, its ownership and enthusiasm for it.

Test pipes

Thread Tools
 
Old 05-04-2006, 06:38 AM
  #31  

 
Harpoon's Avatar
 
Join Date: Mar 2005
Location: Oregon
Posts: 2,402
Likes: 0
Received 7 Likes on 6 Posts
Default

Originally Posted by XclusiveAutosports,May 4 2006, 04:58 AM
BTW, here is what my car sounded like when it had a testpipe and an HKS...
http://videos.streetfire.net/search/s2000+...F7B0D4E46CF.htm
Yep, same slight buzz just at the moment of rpms starting to drop that all test pipe/aftermarket exhaust fitted cars have. Not annoying, but definitely there.

By the way, you need to hit the apex a little tighter on those corners!
Old 05-04-2006, 08:28 AM
  #32  
Registered User
 
neveronlines2k's Avatar
 
Join Date: Nov 2005
Location: Orange County CA
Posts: 5,749
Likes: 0
Received 0 Likes on 0 Posts
Default

Man I spoke too soon . This morning when I turned on the S. Baaaaam! Check Engine light.

I called berk and they suggested I reset my ecu? I dont think that is going to fix it or the CEL probably would have come on right away. I will get an anti-fouler after work today. Hope fully that will fix it.

xviper - I pulled the back up fuse under the dash, left it out for about 2 min. after I put the fuse back in the CEL stayed on. When resetting the ECU does the key have to be in the ignition (in the off position)? I did not have the key in the ignition while the backup fuse was out.
Old 05-04-2006, 09:31 AM
  #33  

 
Emil St-Hilaire's Avatar
 
Join Date: Oct 2002
Location: St-Redempteur,Qc.
Posts: 21,997
Received 469 Likes on 400 Posts
Default

If it's too complicated,just disconnect your"+" battery cable,for a few minutes.
Old 05-04-2006, 01:19 PM
  #34  

 
xviper's Avatar
 
Join Date: Mar 2001
Posts: 37,305
Likes: 0
Received 16 Likes on 14 Posts
Default

Originally Posted by neveronlines2k,May 4 2006, 09:28 AM
xviper - I pulled the back up fuse under the dash, left it out for about 2 min. after I put the fuse back in the CEL stayed on. When resetting the ECU does the key have to be in the ignition (in the off position)? I did not have the key in the ignition while the backup fuse was out.
Are you sure it was the "BACK UP" fuse. It only needs to be out for less than 1/2 a minute and the ignition should be OFF.
It amazes me that Berk would tell you to just reset the ECU to fix something that is a design flaw with their product.
Old 05-04-2006, 02:14 PM
  #35  
Registered User
 
neveronlines2k's Avatar
 
Join Date: Nov 2005
Location: Orange County CA
Posts: 5,749
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by xviper,May 4 2006, 01:19 PM
Are you sure it was the "BACK UP" fuse. It only needs to be out for less than 1/2 a minute and the ignition should be OFF.
It amazes me that Berk would tell you to just reset the ECU to fix something that is a design flaw with their product.
Ya it was the right fuse. Third one from the top 7.5 amp. I dont know why the light did not stay off. when I put the key back in it turned on, I started the car and it remained on. I just disconnected the ECU instead.

Emil St-Hilaire, I was looking for another way to do it because I did not want to lose my Radio if possible, my owners manual is at home and it has my radio code in it.

About Berk whatever. I ran to pep boys and picked up the anti-fouler, installed it real quick and ran back to work . (crosses fingers and hopes the CEL stays off!) I guess I got one of their test pipes that was flawed . My thinking is that once the CEL turns on it would probably come on again and I would rather fix the issue than to keep pretending its not there (resetting the ECU every 40-50 miles)

Thanks for responding xviper
Old 05-04-2006, 02:41 PM
  #36  
Banned
 
REVZ TO9's Avatar
 
Join Date: Jan 2006
Location: Orange County, CA
Posts: 1,243
Likes: 0
Received 0 Likes on 0 Posts
Default

I got the unresonated Berke test pipe, has cel fix built in it. Makes my single Apexi N1 setup scream in VTEC!!! But if you get this, be prepared to smell more fumes.
Old 05-07-2006, 04:09 PM
  #37  
Registered User

 
vtec9's Avatar
 
Join Date: Dec 2005
Location: Connecticut
Posts: 10,106
Likes: 0
Received 5 Likes on 3 Posts
Default

Ok I installed my berk TP last saturday (8 days ago). Since then I have driven 1200 miles and cycled almost 4 tanks of gas (took a 650 mile trip this weekend), and I have yet to get a CEL.. so the berk fix seems to have worked for my car.

edit: I've broken 2,000 miles with no CEL.
Old 05-07-2006, 05:43 PM
  #38  
Registered User

 
slimjim8201's Avatar
 
Join Date: Jul 2005
Location: Gie
Posts: 1,670
Likes: 0
Received 0 Likes on 0 Posts
Default

A Berk TP should arrive in the mail in a next few days. I am very anxious to hear how it sounds with my HKS. From the clips that I have heard...it will be very, very good.

I probably wouldn't have purchased the test pipe, but I deemed it a "necessary modification" to get the most out of the BRP SC kit.
Old 05-07-2006, 06:13 PM
  #39  
Registered User
 
Aggv's Avatar
 
Join Date: May 2005
Location: Cleveland
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by XclusiveAutosports,May 4 2006, 04:58 AM
BTW, here is what my car sounded like when it had a testpipe and an HKS...
http://videos.streetfire.net/search/s2000+...F7B0D4E46CF.htm
That sounds real good. The HKS seems to be most F1-ish sounded exhuast for the S. If that makes sense
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ScoobyWhite
S2000 Modifications and Parts
17
11-30-2009 02:24 AM
H2kBBAP2
S2000 Modifications and Parts
15
05-20-2009 07:47 AM
J'sS2K
S2000 Talk
9
11-12-2007 04:51 PM
radtech
S2000 Talk
17
10-02-2006 09:14 AM
yummyph0916
S2000 Talk
5
07-16-2004 08:35 PM



Quick Reply: Test pipes



All times are GMT -8. The time now is 09:23 PM.