rear clicking noise , any ideas?
06-10-2003, 10:27 AM
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: markham
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
rear clicking noise , any ideas?
after having my tired messed up by honda, i.e. they forgot to balance it and put it on poorly. Althought it's been fixed now.
Now when I turn from start up I hear a faint click click click sound right before the clutch fully engage. it's fine going from other gears, the sound comes from the rear right. What problem could this be?
at first I thought may be it's the differential, but it only happen when I am at a start and especially when I am making a left / right turn from start.
please help.
Now when I turn from start up I hear a faint click click click sound right before the clutch fully engage. it's fine going from other gears, the sound comes from the rear right. What problem could this be?
at first I thought may be it's the differential, but it only happen when I am at a start and especially when I am making a left / right turn from start.
please help.
06-10-2003, 11:25 AM
#3
Registered User
Join Date: Jun 2002
Location: Frederick
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Please take a look at my recent shinanigans with a rear ticking sound!! It's positively amazing!!
https://www.s2ki.com/forums/showthread.php?...threadid=122781
Marc
https://www.s2ki.com/forums/showthread.php?...threadid=122781
Marc
06-10-2003, 04:14 PM
#4
Registered User
Join Date: May 2001
Location: Goodyear, AZ
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
This might not be related, but I had found thanks to RT a TSB that had a news addendium.
This was the exact issue I had. I went to the dealer, showed them this:
and they took off both spindle nuts, greased everything up, put it back and it seems fine. I'm so glad that issue has been resolved. Thanks RT!
Rear end pop/click noise when neutral to start forward motion or reverse motion. Basically, when starting out in 1st, I'd hear a short clicking noise from the rear or when I stop and then go into reverse, same thing. Anything to do with an initial force to the driveline, there's a couple of audible clicks or pops then goes away.
and they took off both spindle nuts, greased everything up, put it back and it seems fine. I'm so glad that issue has been resolved. Thanks RT!
Thread
Thread Starter
Forum
Replies
Last Post