Slim2000

I tried searching but all I can find is that it needs to be modified. I know hardtopguy sells the splash shield retro kit but this adds an additional $150 to the conversion.

So my question is, what exactly has to get modified to get the splash shields to fit with an 04 bumper?

Thanks

Slim2000

I know someone must know

xviper

In general, the undertray is just a bit too short to reach the lower lip of the '04 front bumper - about an inch or two too short. You'd need to make some kind of extensions at each attachment point (I believe there are about 9 of them). Without these the undertray will catch in the wind and get bent backwards and rip off.