jdm part numbers
#1
jdm part numbers
does anyone have a listing of jdm part numbers for the s2000? is there a list on any of the threads? for parts such as the colored badges or the frame for the navigation unit, import dealers such as optauto.com have such items but will never give the the numbers.
#2
You can get colored badges from MG Racing or RM Racing. You wouldn't want the JDM console frame for the Navigation Unit because then you would be have to redo the entire car to right hand drive.
#4
from looking at pictures, it looks like the frame for the jdm navigation unit is symmetrical, and if so, it should work, i would just need a local shop to cut a hole in my dash, however, is it the frame in fact shaped differently toward rhd?
#5
as for the badges, i ordered my first set from rm racing, but they were for the nsx and so the prongs were broken off, and the shape was squarish, like an older generation style, from the early 90s? and they were 80 bucks each, wasn't even in perfect condition, look like it was stolen, what a rip!!! and they were advertising that they were in the original factory manual for s2000, or something, B.S.!!! so i sent it back, and after they raped me for shipping and restocking, i got about half back, anyways, i'm looking for the originals if anyone has them
#6
Originally posted by bshigeta
from looking at pictures, it looks like the frame for the jdm navigation unit is symmetrical, and if so, it should work, i would just need a local shop to cut a hole in my dash, however, is it the frame in fact shaped differently toward rhd?
from looking at pictures, it looks like the frame for the jdm navigation unit is symmetrical, and if so, it should work, i would just need a local shop to cut a hole in my dash, however, is it the frame in fact shaped differently toward rhd?
Trending Topics
#9
Originally posted by bshigeta
from looking at pictures, it looks like the frame for the jdm navigation unit is symmetrical, and if so, it should work, i would just need a local shop to cut a hole in my dash, however, is it the frame in fact shaped differently toward rhd?
from looking at pictures, it looks like the frame for the jdm navigation unit is symmetrical, and if so, it should work, i would just need a local shop to cut a hole in my dash, however, is it the frame in fact shaped differently toward rhd?
Do you have a good picture of the JDM dash with sat nav? I can't seem to find one.
#10
i have a pic, i'll post it soon, but was wondering if you get a hold of one, if you could post the jdm number? so i can order one too, after looking at the photo, the frame might not be symmetrical, it looks like it bends outward toward the drive console, but then you might be able to flip the frame when installing, or even just flip that outer frame piece, let me know if you get it