speed_bump

I remember see this on the site before they made all the changes to the site but can't find it in the libray anymore. If one of you has it can you let me know. Or if you find it on the site ( I have been known to miss things right in front of my face) can you point me to it.


Thanks,

txst

It's in the library section under Convertible Boot Recall - TSB38. There is a PDF file that you can download.

MyBad

CAUTION!

The lower the stop is placed the more likely you will crease the window when the top is lowered. Don't over do it!!

mister_two

Good point, MyBad, in the brief time of experimenting with the lowered stop, I noticed two pronouced horizontal creases. Two creases that may be more severe than before the adjustment was made. Unfortunately, that's the tradeoff for a non-flopping boot cover.

txst

I always use a "Miata tube" and I haven't noticed any difference in the severity of the creases.

amtg4u

Where in the Library do I go for the TSB for this fix?

s2ktaxi

Also, if you adjust it too low, you are also likely to get scratching of the inside of the plastic window (00-01) if you are not using a mat of some sort for the well.