Good service and clear corner mod
#1
Registered User
Thread Starter
Join Date: Mar 2001
Location: Phoenix
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Good service and clear corner mod
I was about to perform the clear corners mod but noticed a bubble forming in the gray paint inside the headlight housing in front of the HID lens. I didn't want Honda to blame me for the bubble so I decided to put off the mod and call the closest dealer for a replacement. I called Bell Honda here in Phoenix and was told to visit the service dept so they could take a look at it. The service rep took a quick glance to confirm my claim. After he took down some info he told me he'd call when the new headlight was in. I've been to Bell Honda several times for various things and they seem to be quite competent. I just wanted to share the good experience since so many bad experiences are reported.
On another note, I'm fully documenting my clear corners mod with pics and notes to post here. Thanks to S2KO, SilverStreak, and others for their contributions to the information on here so far.
On another note, I'm fully documenting my clear corners mod with pics and notes to post here. Thanks to S2KO, SilverStreak, and others for their contributions to the information on here so far.
#4
Registered User
Thread Starter
Join Date: Mar 2001
Location: Phoenix
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by s2ktaxi
Where are you getting the clear corner lenses from?
Where are you getting the clear corner lenses from?
#7
Registered User
Join Date: Oct 2000
Location: Torrance
Posts: 8,332
Likes: 0
Received 0 Likes
on
0 Posts
A lot of people have this bubble in their headlights. It might be a design flaw and might come back. I think the HIDs burn so hot that they cause the bubbles to form in the headlight assembly.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Mar 2001
Location: Phoenix
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
I just picked up the replacement headlight assembly from the dealership. They are allowing me to switch out the parts but they are requiring me to return the original part. I asked them if I could do this because I'm taking them out to remove the diffuser anyway. (I didn't tell them what I was doing - just that I was doing some work that required I remove the headlights.)
So, tomorrow is the clear-corner mod...
So, tomorrow is the clear-corner mod...