A breath of fresh breath
#12
Neither one.!!
Low restriction air filter (good one,like J.R.!!) and a cold air intake snorkel(like Muz or Spoon.),or a good rad. cooling plate,like AUT,or Garage Defend.
Like this:
Low restriction air filter (good one,like J.R.!!) and a cold air intake snorkel(like Muz or Spoon.),or a good rad. cooling plate,like AUT,or Garage Defend.
Like this:
#13
Originally Posted by Emil St-Hilaire,Nov 23 2005, 09:02 AM
Neither one.!!
Low restriction air filter (good one,like J.R.!!) and a cold air intake snorkel(like Muz or Spoon.),or a good rad. cooling plate,like AUT,or Garage Defend.
Like this:
Low restriction air filter (good one,like J.R.!!) and a cold air intake snorkel(like Muz or Spoon.),or a good rad. cooling plate,like AUT,or Garage Defend.
Like this:
Air filter like K&N drop in? How much for the JR?
The AEM V2 can be bought for around $250 or so on the internet shipped. Only thing is that the installation is more involved than a short ram type.
What needs to be done for the type of config you recommend? Any HP gains?
#14
Maybe 2-3 H.P.
And forget the manufacturers(K&N) claiming 8 to 10 H.P.;on a S2000,this is Bulls&#@.!!!
+ with this set-up,you have a slight ram air effect at speed.
Positive press.measurable in a few inches of water.!(not mercury!!)
And forget the manufacturers(K&N) claiming 8 to 10 H.P.;on a S2000,this is Bulls&#@.!!!
+ with this set-up,you have a slight ram air effect at speed.
Positive press.measurable in a few inches of water.!(not mercury!!)
#15
The stock intake is already pretty high-flow. Just replace the filter with a high-flow one, and get a radiator cooling plate and you should be set.
CAI's on this car get MINIMAL gains. The 5-10hp gains quoted above are suspect. I would look more to 3-5 tops. Maybe 7-10 with a full exhaust and header.
I got he INJEN, because I was looking for a more aggressive sound. Its basically the same as he AEM v2, but a bit cheaper. It also does not have as large of an up-angle at the filter (traps water and promotes hydrolock).
I also installed an AEM 3" bypass, just as an extra precaution on the hydrolock issue. They also now have a Gore-Tex type bonnet that goes over the filters and supposedly eliminates hydrolock risk (short of submerging the filter). Dont know what it does to airflow, though, they claim it does not affect it, but I would like to see an independent study on it, though.
John
CAI's on this car get MINIMAL gains. The 5-10hp gains quoted above are suspect. I would look more to 3-5 tops. Maybe 7-10 with a full exhaust and header.
I got he INJEN, because I was looking for a more aggressive sound. Its basically the same as he AEM v2, but a bit cheaper. It also does not have as large of an up-angle at the filter (traps water and promotes hydrolock).
I also installed an AEM 3" bypass, just as an extra precaution on the hydrolock issue. They also now have a Gore-Tex type bonnet that goes over the filters and supposedly eliminates hydrolock risk (short of submerging the filter). Dont know what it does to airflow, though, they claim it does not affect it, but I would like to see an independent study on it, though.
John
#16
I went with the K&N FIPK 57-3514 for $200 and claimed 9.55 hp
It sounds good...
It looks good
I beleive it is making some power
2 weeks I'm going to dynowith current mods... and then add Vafc2
redyno
I did the AEM on last car.... this one I'm going with K&N
we live .... we learn
It sounds good...
It looks good
I beleive it is making some power
2 weeks I'm going to dynowith current mods... and then add Vafc2
redyno
I did the AEM on last car.... this one I'm going with K&N
we live .... we learn
Thread
Thread Starter
Forum
Replies
Last Post