S2000 Talk Discussions related to the S2000, its ownership and enthusiasm for it.

ASM Technical Thread! Ask your ?s here!

Thread Tools
 
Old 07-23-2007, 08:12 AM
  #61  
Banned
Thread Starter
 
JONDEMANDsales's Avatar
 
Join Date: Sep 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Default

GPW03, GRUNTS2K: The difference in power is (on average between different vehicles) 4 hp. HOWEVER, there really is not much benefit from comparing 2 different PEAK HORSEPOWER numbers, since you are barely in the upper extremes of your RPM band. When people tell you their horsepower numbers, you need to look at the "big" picture and check out their dyno sheets.

The real difference in 60mm and 70mm is driveability and throttle repsonse.

60mm is for the driver that will drive mainly on the street, and is looking for low-rpm throttle response. Torque is already limited in the S2000, and using a large diameter exhaust will cause the vehicle to have even less torque in the lower-rpm band. The exhaust note is also more "civilized"

70mm is for the driver that will be driving the car aggressively and/or be used on the track. The 70mm allows greater torque in the mid-high rpm band. But the best benefit that ASM has experienced is that the VTEC engagement is alot smoother. With this exhaust (and a little bit of tuning), you will be able to clear corners with the throttle on, without having to worry about the VTEC engaging (which normally would cause an increase in torque applied to the wheels and disrupt the balance of the vehicle). ASM Japan recommends this size to most of their customers because of the exhaust note, and they will love pushing/driving their S2000 even more with this exhaust.

So the answer to which is better depends on your driving style. Personally I would go 70mm.
JONDEMANDsales is offline  
Old 07-23-2007, 08:33 AM
  #62  
Banned
Thread Starter
 
JONDEMANDsales's Avatar
 
Join Date: Sep 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ITRbroham,Jul 21 2007, 04:10 PM
Is the ASM/Sachs coilover setup basically the same on both the ASM "street" and T/A S2Ks? Different spring rates?
The ones that are sold through retail is considered a "street" version. The actual suspension used on the Time Attack vehicles varies from year to year. Spring rates were different between the years, and valving was adjusted.
JONDEMANDsales is offline  
Old 07-23-2007, 12:02 PM
  #63  

 
moogleii's Avatar
 
Join Date: May 2007
Location: OC
Posts: 1,924
Received 0 Likes on 0 Posts
Default

What's your predicted longterm reliability with the 2.4 toda kit? I know you guys can just rebuild your engine whenever, but for us mortals...=)
moogleii is offline  
Old 07-24-2007, 09:20 AM
  #64  
Banned
Thread Starter
 
JONDEMANDsales's Avatar
 
Join Date: Sep 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by moogleii,Jul 23 2007, 12:02 PM
What's your predicted longterm reliability with the 2.4 toda kit? I know you guys can just rebuild your engine whenever, but for us mortals...=)
Reliability is relative to how you drive your car. Even though its a 2.4 Toda, we try to "baby" the motor when its not going all out (i.e. Time attack, Dyno, etc). We take every precaution we can to increase the longevity of the motor. Even if it means we have to take it apart. But from what we have seen from the quality of the pieces, the 2.4 Toda kit really looks like a setup that should last a quite a bit of time.
JONDEMANDsales is offline  
Old 07-24-2007, 10:16 AM
  #65  
Registered User
 
KstreetDC's Avatar
 
Join Date: Jun 2005
Location: Arlington, VA
Posts: 1,072
Likes: 0
Received 0 Likes on 0 Posts
Default

Bernard,

What ecu is ASM using with the Toda engine? I know the Tracy Sports 2.4 motor uses a Motec, but I have never read anything about the ASM motor's brains.

-Will
KstreetDC is offline  
Old 07-24-2007, 10:39 AM
  #66  
Banned
Thread Starter
 
JONDEMANDsales's Avatar
 
Join Date: Sep 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by KstreetDC,Jul 24 2007, 10:16 AM
Bernard,

What ecu is ASM using with the Toda engine? I know the Tracy Sports 2.4 motor uses a Motec, but I have never read anything about the ASM motor's brains.

-Will
ASM also uses the Motec ECU for their TODA setup.
JONDEMANDsales is offline  
Old 07-24-2007, 01:43 PM
  #67  
Registered User

 
jarod's Avatar
 
Join Date: Feb 2004
Location: Yea
Posts: 1,714
Likes: 0
Received 0 Likes on 0 Posts
Default

ASM Blog translated:

http://www.google.com/translate?u=http%3A%...n&hl=en&ie=UTF8

BTW, where's the best/cheapest place to order the ASM rear FRP bumper (non flared)?
jarod is offline  
Old 07-24-2007, 02:17 PM
  #68  
Registered User
 
KstreetDC's Avatar
 
Join Date: Jun 2005
Location: Arlington, VA
Posts: 1,072
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jarod,Jul 24 2007, 05:43 PM
ASM Blog translated:

http://www.google.com/translate?u=http%3A%...n&hl=en&ie=UTF8

BTW, where's the best/cheapest place to order the ASM rear FRP bumper (non flared)?
J-Ondemand, see Bernard's signature for their contact info.
KstreetDC is offline  
Old 07-24-2007, 02:18 PM
  #69  
Registered User
 
KstreetDC's Avatar
 
Join Date: Jun 2005
Location: Arlington, VA
Posts: 1,072
Likes: 0
Received 0 Likes on 0 Posts
Default

J-OnDemand
www.j-ondemand.com
Phone: (714) 313-1765 cell
Phone714) 963-8888 Ext.12 office
, and E-Mail: hishida@j-ondemand.com or bnguyen@j-ondemand.com
AIM: JondemandHiro, jondemandasm

Ask for Bernard or Hiro
KstreetDC is offline  
Old 07-25-2007, 04:22 PM
  #70  
Banned
Thread Starter
 
JONDEMANDsales's Avatar
 
Join Date: Sep 2006
Posts: 93
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jarod,Jul 24 2007, 01:43 PM
ASM Blog translated:

http://www.google.com/translate?u=http%3A%...n&hl=en&ie=UTF8

BTW, where's the best/cheapest place to order the ASM rear FRP bumper (non flared)?
The best/cheapest place to buy ASM is through an AUTHORIZED dealer (like us )
JONDEMANDsales is offline  



All times are GMT -8. The time now is 10:14 AM.