Alpine radio help...
01-13-2002, 08:28 AM
#1
Registered User
Thread Starter
Join Date: Sep 2001
Location: Mechanicsville
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Alpine radio help...
I just had the factory stock radio replaced in my S2000 with an Alpine CDA-7977 head unit, replaced the stock 6.5" speakers in the door with Polk Audio 6.5" speaker and added a 150W Alpine amp as well.
I have a couple questions for those of you out there that may have done something similar. Does anyone know of an adapter to get the side controls connected to my new Alpine head unit. The installer had no idea of any kit available yet. ALso, has anyone installed the rear speaker kit in their car?
Thanks.
I have a couple questions for those of you out there that may have done something similar. Does anyone know of an adapter to get the side controls connected to my new Alpine head unit. The installer had no idea of any kit available yet. ALso, has anyone installed the rear speaker kit in their car?
Thanks.
01-13-2002, 08:40 PM
#3
Registered User
Join Date: Apr 2001
Location: Poconos
Posts: 1,891
Likes: 0
Received 0 Likes
on
0 Posts
You can get the PAC SWI-X Unit through me which will allow you to retain your dash controls. I also sell the Polk rear speaker system.
On some S2000s the SWI-X needs a 3.9kohm resistor between the white wire and ground to allow MODE to work properly.
On some S2000s the SWI-X needs a 3.9kohm resistor between the white wire and ground to allow MODE to work properly.
Thread
Thread Starter
Forum
Replies
Last Post