Will 245/45 17" on CE28N fit up front?
#12
Thread Starter
Dave, when you say the rear rim (9") can be used up front with spacers, could you clarify? As I have 2 sets of rims, I could run the 9" on all four corners
#14
Registered User
Join Date: Oct 2000
Location: Santa Cruz, CA
Posts: 1,664
Likes: 0
Received 0 Likes
on
0 Posts
Richard,
The center bore on the rear wheels is smaller than the front wheels. 2.5" vs 2.75" i believe or something similar. Either way a rear wheel wont fit flush onto a front hub because of the smalll center bore. If you place a spacer on the front hub then the rear wheel can sit flush against it but it will stick out by however thick the spacer is.
What i'm suggesting is that you widen the center bore of your CE28N so that it sits flush against your front hub without the use of a spacer.
The center bore on the rear wheels is smaller than the front wheels. 2.5" vs 2.75" i believe or something similar. Either way a rear wheel wont fit flush onto a front hub because of the smalll center bore. If you place a spacer on the front hub then the rear wheel can sit flush against it but it will stick out by however thick the spacer is.
What i'm suggesting is that you widen the center bore of your CE28N so that it sits flush against your front hub without the use of a spacer.
Thread
Thread Starter
Forum
Replies
Last Post