s2000ellier

i dont think the planted mount can get a seat as low as a BC slider

i do think i feel safer with the planted mount

you may be able to adjust the recline of the seat to lower your head but depending on your seat it might contact the rollbar preventing you from further recline

GravyRobber

I was originally planning on getting a BC slider and re-welding the whole thing, and making some custom side brackets for it that are stronger. I'm 6'1, and don't come close to passing the broom stick test with the stock seat. I really need to sit as low as possible. The car is mostly stock, and I'd really like to be able to pass broom stick with the factory roll hoops. I do plan on adding a roll bar at some point, but right now, I'd rather spend my money on seat time.

nissanfanatic

Pics of Sparco Pro ADV fitment/mounts in AP1.

[attachment=68443:IMG_6591.JPG]


[attachment=68444:IMG_6592.JPG]


[attachment=68445:IMG_6593.JPG]


[attachment=68446:IMG_6597.JPG]


[attachment=68447:IMG_6598.JPG]


Seat is as far back as it will go and it is sitting on the eye bolts that I used to mount the harnesses; it is as low and as far back as it can go with the cabin in stock form.

//steve\\

How wide is that Sparco? Rough max waist size you think it would fit.

pgss2k

I used Wedge Engineering (non sliding) seat base for my seats. Seemed to be as low as I could get. Solid pieces that bolted in to the OEM holes, then side mounts for my seats.

nissanfanatic

I'd say 36" max.

GravyRobber

What seat were you using? Was it significantly lower than stock?

Thanks.

nismo300zx

between the bride zeta 3 and the sparco evo 2, which one is better in terms of fitments inside the car?

Also what rails do I need to buy?

Thank you in advance.

GravyRobber

I've been doing some reading on the Sparco EVO series, and its pretty confusing because they have re-named their entire line. The new "EVO II" is supposedly the same as the previous "EVO II Plus", and the new "EVO II US" is supposed to be the same as the previous "EVO III". It just makes it confusing when reading reviews because, depending on when the review was done, it might be a completely different seat than the one you are actually buying. Just thought I'd pass this along as a warning to anyone looking into the EVO seats. The EVO II is now on my radar.

manolo1492

Anyone have any input on the Momo supercups and OMP Champ-R regarding fitment in car and on me? I'm 6'2" 205lbs 34 waist 33 inseam. If you have any better seat suggestions in the same price range I would love to hear them ($700 or less per seat). Thanks in advance!

Actually, just looked at the specs for the Sparco Evo 2, non US model, and I think thats prob the way to go