Race seats
#101
Well IIRC you run SCCA and run STR.... in ALL SCCA autox classes (including stock) you are allowed a roll bar. The harddog roll bar is fine for STR/Stock/whatever as long as you keep all the interior bits and OEM roll hoops, the required trimming of the trim is OK.
#103
Registered User
570mm from what have been reading fits while 580 is really close with a small amount of rubbing on the door side.
Is the pole position a good fit for someone with a 33" waist? I am afraid it will be a bit too big.
Is the pole position a good fit for someone with a 33" waist? I am afraid it will be a bit too big.
#105
Registered User
I found some measurements for the harness holes on the pole positions. Looks like they are too low for me. I measure 25" of shoulder height when sitting down.
The pole position is about 23" and 1/4 to the middle of the hole for a harness. This is with the cusion and it not being compressed. Compressed i would add maybe a 1/2 or 3/4 of an inch to that.
I think it would be really useful for everyone to measure the seats for this since it isn't something the manufacturers are providing.
The pole position is about 23" and 1/4 to the middle of the hole for a harness. This is with the cusion and it not being compressed. Compressed i would add maybe a 1/2 or 3/4 of an inch to that.
I think it would be really useful for everyone to measure the seats for this since it isn't something the manufacturers are providing.
#106
Registered User
Recaro SPGs harness holes are right at 34 1/2 inches from the cushion. Looks like the better bet for people with longer torsos. I need to find one to sit in Georgia so I can see if the height from the cushion to the top is ok and if my hips will be comfortable. I sat in a Cobra imola pro and it was too narrow at 14.5". Unfortunately Recaro shows measurements that are nearly useless. OMP, Cobra etc at least show the inner width of the seat and measure height in terms that can compare.
Anyone have a SPG in georgia or a Cobra Suzuka pro/S that I can sit in? Only reason I am considering the Cobra as they are good for taller people and the wings are smaller than the SPG so they can fit.
The customer service still scares me quite a bit.
Anyone have a SPG in georgia or a Cobra Suzuka pro/S that I can sit in? Only reason I am considering the Cobra as they are good for taller people and the wings are smaller than the SPG so they can fit.
The customer service still scares me quite a bit.
#108
Former Sponsor
#109
Former Sponsor
Recaro SPGs harness holes are right at 34 1/2 inches from the cushion. Looks like the better bet for people with longer torsos. I need to find one to sit in Georgia so I can see if the height from the cushion to the top is ok and if my hips will be comfortable. I sat in a Cobra imola pro and it was too narrow at 14.5". Unfortunately Recaro shows measurements that are nearly useless. OMP, Cobra etc at least show the inner width of the seat and measure height in terms that can compare.
Anyone have a SPG in georgia or a Cobra Suzuka pro/S that I can sit in? Only reason I am considering the Cobra as they are good for taller people and the wings are smaller than the SPG so they can fit.
The customer service still scares me quite a bit.
Anyone have a SPG in georgia or a Cobra Suzuka pro/S that I can sit in? Only reason I am considering the Cobra as they are good for taller people and the wings are smaller than the SPG so they can fit.
The customer service still scares me quite a bit.
Are you talking about the profi XL?, or the SPG? Recaro does not have any SPG model in their current USA lineup.
http://www.recaro-automotive.com/us/.../overview.html