06Estukay

The Skunk2 dbw tb is ~$470.
A brand new mdx/zdx J37 tb + p2r adapter is $260. Only additional parts needed are a couple of throttle body gaskets. So lets say $270 all in.

That's $200 cheaper than the junk2. Plus its OEM quality.

S2K@PR

what would be the difference between the acura type sh awd throttle and the mdx one?

i remember paying over $400 for the typesh one (brand new) a couple years ago ...

06Estukay

The mdx/zdx unit is smaller than the type sh awd by approximately 1mm in diameter.

K20z3allmotor

wrong, they are the exact same size, only difference is quality, and material used on internals. TL shawd is made in japan and mdx/zdx is made here.

06Estukay

Did my research on this already. The outlet on the mdx/zdx unit is 69mm vs 70mm on the TL sh awd.

K20z3allmotor

i have both TB's here at my shop in stock. your research is wrong.

pictures courtesy of IMT

06Estukay

Measure with a caliper. DO IT! DO IT!

Thanks for the pics!

K20z3allmotor

whats the point, im just proving they are the same size. neither is 70mm exit like most like to claim. the plate is 69.6mm and its even stamped on it

steadyc

@ k20z3allmotor this whole post was to help s2k owners. As history proves on most of these threads/posts have quite a bit of incorrect information. My car is mostly stock. I have just exhaust(fujitsubo super ti), intake J's racing Tsuchinko, Flashpro, RDX injectors, MDX TB, Tune from Vittviper. The best technician to implement parts. That's it. With all mentioned it made those numbers on the previous page.

Urge

Any custom maping between Flashpro and the Acura DBW TBs?

Another way to ask it is are the voltages per throttle position the same between the S2000 and acura TBs?