Direct replacement 440cc pintle injectors
#1
Direct replacement 440cc pintle injectors
Does anybody if there is a direct replacement approximately 440cc pintle injectors for the AP2 intake manifold?
OEM RDX 410cc sure would be nice but are not a direct replacement, I’m looking for an equivalent, again pintle...not ball, or disc, pintle...
If anybody has info please let me know.
Cheers
OEM RDX 410cc sure would be nice but are not a direct replacement, I’m looking for an equivalent, again pintle...not ball, or disc, pintle...
If anybody has info please let me know.
Cheers
#2
Registered User
Will the RDX injectors not fit the OEM manifold? I'm sure you'd have to wire in the correct connectors though.
The RDX injectors are nice. Capable of getting 35mpg on an H22 with 17:1 A/F, with a 410cc flow rate. This is very good for an OEM injector.
The RDX injectors are nice. Capable of getting 35mpg on an H22 with 17:1 A/F, with a 410cc flow rate. This is very good for an OEM injector.
#3
Not a direct fit, 11mm top rail diameter I think vs RDX 14mm, and also the lenght is different from what I can gather, adapter clips are available, this guy might have a solution.
http://www.xenocron.com/injectors-rd...s-c-30_98.html
I'll go with RC 440cc, since I'll most likely end up with BC stage2 cams & stroke it later on.
Cheers
http://www.xenocron.com/injectors-rd...s-c-30_98.html
I'll go with RC 440cc, since I'll most likely end up with BC stage2 cams & stroke it later on.
Cheers
#4
Had to re-install my RC650cc...
Cheers
#5
Originally Posted by 2ndTimeAround' timestamp='1306632958' post='20627396
Had to re-install my RC650cc...
Cheers
#6
#7
Not sure if anyone has seen this yet, but these guys have a conversion kit now for the RDX injectors for our S2ks. www.balladesports.com
The RDX injectors are disc according to them so not sure if this is what you want.
The RDX injectors are disc according to them so not sure if this is what you want.
Trending Topics
#9