Super Nintendo Chalmers

You should be fine, all a TP is is a straight pipe so not much can go wrong.

beaudin223

ok so now , i read all the 14 page to get one idea on TP , sad a bit to dont see more dyno pic im in the process to get a 63.5 berk and keep the oem exhaust but im gonna change the 2 rear muffler for K-tuned down tips ( look sick ) my question is its really a big deal to change my mind on the 70 mm invidia ? im not going to tune my car i want to keep oem ecu , thanks guys

superchargedk20

Just read the whole thread . I saw this one on ebay.
http://m.ebay.com/itm/151254371279?nav=SEARCH

superchargedk20

^^^^ just went ahead and purchased it

superchargedk20

So I got the test pipe on last week. Did a small review on it. But for 84.99 it was well worth it. The 90 bend works no cel. Highly recommended. Best bolton mod I did.
https://www.s2ki.com/s2000/topic/112...t-pipe-review/

RobAp1

I've recently fitted a 65mm test pipe onto my '02 ap1. I'm also running a k&n fipk intake and j's racing 70rs dual exhaust system. It sounfds amazing but....

Can anyone say if my afr will be affected much by this combination? I'm just a little weary that i will be running slightly lean in vtec. I track the car quite a lot so i want to be sure that i'm not going to have any problems.

thanks!

Davo307

Ap1 won't have any issues with this. You are just fine.

RobAp1

Thanks for the reassurance

Ham8urger

Does anyone know what the INSIDE DIAMETER of the T1R Resonated Test Pipe is???





http://www.evasivemotorsports.com/mm...-18160-AP1-0NA

Behradsays

Hey guys, I read through this thread, and it sounds like some people say 70mm is great and some are running 60mm.
My question is, can I run the 70mm Invidia Test Pipe with my stock exhaust? I'm not sure what the diameter size of our stock exhausts are. I just picked up a 00 ap1.

Also, here is the TP I was looking at getting. I don't see that 90º bend, but it advertises as having a CE fix.
http://www.redline360.com/invidia-te...fix-HS00HS1TP2