Replacement Tonneau Snaps?
09-24-2021, 11:48 AM
#2
I think this is it: https://www.hondapartsnow.com/genuin...6-s2a-000.html
90316-S2A-000
Hook, Female (Cover)
The following users liked this post:
seawolfxix (09-24-2021)
09-24-2021, 11:50 AM
#3
...and who knew that cover lists for over $650!!!!!
https://www.hondapartsnow.com/genuin...0-s2a-305.html
https://www.hondapartsnow.com/genuin...0-s2a-305.html
The following users liked this post:
seawolfxix (09-24-2021)
09-24-2021, 12:11 PM
#4
Registered User
Thread Starter
I think this is it: https://www.hondapartsnow.com/genuin...6-s2a-000.html
90316-S2A-000
Hook, Female (Cover)
09-24-2021, 01:19 PM
#5
Join Date: Aug 2012
Location: Foothills East of Sacramento
Posts: 5,878
Received 1,731 Likes
on
1,031 Posts
One popped out on mine after I removed it in the field. I could not find it on the ground or in the car so I had to get one from the dealer. Not cheap by any means but it works. I use the cover a lot. It is on now and has been for about 6 months. Keeps the top out of the sun, keeps it clean, and it looks nice. I remove it for overnight road trips.
BTW, try using the plastic auto trim tools for reaching in there to pull the "button" to release the catch. Sometimes it is hard to fit your hand in there to do it. HF has them for cheap. I keep one in the side pocket of the door just for that.
BTW, try using the plastic auto trim tools for reaching in there to pull the "button" to release the catch. Sometimes it is hard to fit your hand in there to do it. HF has them for cheap. I keep one in the side pocket of the door just for that.
09-26-2021, 11:04 AM
#7
Join Date: Aug 2012
Location: Foothills East of Sacramento
Posts: 5,878
Received 1,731 Likes
on
1,031 Posts
Trim tools? I just picked them up for a few bucks at Harbor Freight.
However on Amazon try this:
The one on the far right is the one I use.
However on Amazon try this:
The one on the far right is the one I use.
Trending Topics
09-29-2021, 02:52 PM
#8
https://www.sailrite.com/All-Hardwar...-and-Fasteners
https://www.sailrite.com/Loxx-Pull-I...s-Black-Chrome
About halfway down the page, the "Loxx" fasteners are the same snaps. I bought new ones for the snaps that fell off my tonneau.
Honda has discontinued much of the little stuff.
https://www.sailrite.com/Loxx-Pull-I...s-Black-Chrome
About halfway down the page, the "Loxx" fasteners are the same snaps. I bought new ones for the snaps that fell off my tonneau.
Honda has discontinued much of the little stuff.
The following 2 users liked this post by fredsvt:
cosmomiller (09-29-2021),
Mr.Matchbox (10-01-2021)
10-02-2021, 05:47 PM
#9
Registered User
Thread Starter
https://www.sailrite.com/All-Hardwar...-and-Fasteners
https://www.sailrite.com/Loxx-Pull-I...s-Black-Chrome
About halfway down the page, the "Loxx" fasteners are the same snaps. I bought new ones for the snaps that fell off my tonneau.
Honda has discontinued much of the little stuff.
https://www.sailrite.com/Loxx-Pull-I...s-Black-Chrome
About halfway down the page, the "Loxx" fasteners are the same snaps. I bought new ones for the snaps that fell off my tonneau.
Honda has discontinued much of the little stuff.
^ I found this thread / bulletin, which supports your comment. The “long” snap (90318-S2A-000) seems to have been discontinued.
Do the female Loxx components work with Honda’s male components?
10-10-2021, 05:12 AM
#10
Registered User
Thread Starter
The answer is “yes”. I ordered the Loxx product linked above, and they do work with the Honda studs.
HOWEVER, the “Loxx® Pull It Up Fastener Cloth‑to‑Cloth Set for Thick Assemblies” only works on the bungee straps. They are too short for the holes pictured in my original post above.
I have now ordered the “Loxx® Pull It Up Fastener Upper Head Smooth XXL With Regular Washer” for the thicker section of the tonneau cover.
HOWEVER, the “Loxx® Pull It Up Fastener Cloth‑to‑Cloth Set for Thick Assemblies” only works on the bungee straps. They are too short for the holes pictured in my original post above.
I have now ordered the “Loxx® Pull It Up Fastener Upper Head Smooth XXL With Regular Washer” for the thicker section of the tonneau cover.