random koni shock question
#11
ya I had moved the c clip while the shocks were on the car. It worked like a charm. On a side note I only lowered my front ones and not my rear ones. Have had no problems with this for the past 3 years
#13
thats good to hear , I have neuspeeds on konis on the lower perch but recently picked up some skunks.just been too lazy to put them on. can u take a pic after u set it on the lower perch. thanks
#14
well my memory is not as good as it use to be but if I remember right I just used a flat head screwdriver and popped the clip out and slid it down while the car was jacked up. It didn't take all but a few minutes to do
#15
Originally Posted by ZSAK,Mar 27 2009, 02:46 PM
well my memory is not as good as it use to be but if I remember right I just used a flat head screwdriver and popped the clip out and slid it down while the car was jacked up. It didn't take all but a few minutes to do
#17
I have koni yellows on lower perch and eibach pro kit springs. Turned out into a pretty stiff very predictable handling car. Good control in oversteer, with a small chance of understeer so far. Of course this was with a good alignment to my specs. I will say with my wheels it makes the car very low.