tharza469

Hey guys, I put on my Ings Rear bumper and everything seems to line up great, except for the 2 mounting points on the bottom of the bumper (in between the exhaust) where the 2 push clips are supposed to attach the bumper to the 2 brackets that hang from the frame of the car. The holes are about an inch or so too short and I don't want to break or crack the bumper trying to force it on. Does anyone have any advice? I can try to take some pics tonight if needed but wasnt sure if anyone knew what to do offhand, maybe a bracket, or just trying to push it as hard as I can. Thanks in advance.

Reds2kracer

If all else fails, you can always zip tie it...

AnthonyD1978

i think it's cause the Ings bumper was made for the AP1....you should look for a post concerning mounting AP1 rear bumpers on an AP2...

tharza469

thanks for all the input...I appreciate it

nte11igence

pics?

Snowmoto125

The same issue arose for myself when switching from an Ap2 bumper to an Ap1; I simply just cut those little brackets you should be fine..One is talking about these correct?

AngryTurtle

Just leave it alone, no need to connect it.