Originally Posted by Bama Dave

Thanks Man. The material is called marine star board about 1/4" black ABS plastic. This is my third splitter I have made for my S2000, did one for the friend who has a spoon front bumper on his S. The first one mounted to the AP2 front bumper. I was destroyed at Wake the Dragon last April. Then the second one mounted to the second bumper. After I installed the C/R lip I knew that I wanted to protect the new C/R lip. Each splitter I have made has been in a different shape. It took me and another S2000 owner about 5 hours to get this splitter on the car and cut out. I have a jig to drill all the hole for the splitter. I have found that all the cars are just a little different on the fastener on the front bumper. I tried to install another one on another S2000 with the AP2 lip. We run into some issues with about a 3/4" gap between the top of the splitter and the bottom of the AP2 lip. So we decided to look into another options stooped the install. The star board is solid black with no issuses if it scarps the ground. I have test the mount and plastic splitter at speed with no problems. If you need more info on the install just post up. Later Bama Dave

Originally Posted by Bama Dave

I have the splitter attached to the radiator stay. There are 2 threaded points on each side to the stay, then 2 holes that hold the center liner to each fender liner. Then all the bumper and center liner and each fender liners across the front bumper. That is how the splitter is attached to the car. All together there are about 20 10mm bolts with the Honda speed clips with the nut on them. I will take some pics from the bottom of the splitter next weekend. Hope this help with you. Later Bama Dave.

Originally Posted by alSpeed2k

Nice work! Did you ever take pics of the underside fo the diffuser?