suzuka-blue-s2k

Here is a link to the black lugs. They have held up great so far with no problems. Also yes they have ball seats so they are safe to use on our OEM wheels.



http://cgi.ebay.com/ebaymotors/20-BA...Q5fAccessories


Here is a link to the spacers. I havent had any problems with these either.

http://cgi.ebay.com/ebaymotors/WHEEL...Q5fAccessories

ripper0306

Thanks.
Do you have 2 pair of those spacers on your 4 wheels ?
(I can read "REAR" on the ebay items), i guess it's okay ?

suzuka-blue-s2k

Those will not work for the front, only the rear. The hub bores on the front and back are different sizes, and to run them safely you want them to be the same size as the bore. Just like if you have rims that have a different bore size, you get centric rings to adapt them to your car. Just search "s2000 front spacers" in the search on ebay and you can find different spacers that will work perfectly for the fronts.

I actually did 15mm spacers in the rear, and I already had some 5mm spacers up front (these do not have the studs in them, I just took the wheels off, slid these on, and bolted the wheels back on and it's been like that for over 2 years fine). As you know my ap2 wheels have +65 offset in the rear, and +55 in the front. This way I am running a +50 offset all the way around and I love the look. It made it look a lot better and it doesnt rub at all. 15mm is the biggest you can go in the rear without rubbing, I think you can do 10mm spacers fine up front, but i'm happy with my 5mm ones.

theGRNapples

http://cgi.ebay.com/ebaymotors/BLUE-...ht_2843wt_1073

Anyone try these?

slowpokeS2K

^^^^its such a simple design, and unless they were made out of plastic, i probably wouldnt worry about it...only thing i would look over are the bolts.

Kitz

I wouldnt plan on actually using those to pull the car around a track.......... =/

Croc

REAL CARBON FIBER SPARK PLUG COVER FOR F20 F22C
http://cgi.ebay.com/ebaymotors/ws/eB...SS%3AUS%3A1123

TheLast13

How would you mount these? These are for 92+ Civic and 94+ Integra.
There is no where to even bolt these on to..

ripper0306

Hum, interesting, i'm lookin for a carbon cover


Suzuka-blue-s2k
thanks for the answer, I'll do the same.
I want a more agressive look than stock without rubbing.
And I think those 15mm spacers will be okay too with lowered springs. (no rubbing etc etc)

suzuka-blue-s2k

No problem, i'm lowered almost an inch and no problems.

To anyone looking for carbon fiber spark plug covers, do not get the Ebay or the ones from the vendor here Witz. You can see only resin in the edges and the carbon isn't tight in the corners at all. Also the holes don't line up perfectly and I had to drill mine out. The best carbon plug cover you can get is a PWJDM one, or an APR. Also it's not like they are to expensive anyways.