Alignment Sugestions
#1
Alignment Sugestions
Installing a set of Buddy Club RSD coilovers, with Ap2V1 wheels.
Looking for anyone running a similar setup to post suggested alignment specs for street and occasional track use
Thanks!
Looking for anyone running a similar setup to post suggested alignment specs for street and occasional track use
Thanks!
#4
Well after some further reading (difficult to find the UK specs) I've decided to run this alignment:
Front:
Caster left 5*50"
Caster right 5*50"
Camber left -1*00"
Camber right -1*00"
Toe left 0*0"
Toe right 0*0"
Total toe 0*0"
Rear:
Camber left -2*00"
Camber right -2*00"
Toe left 0*20"
Toe right 0*20"
Total toe 0*40"
Thoughts?
Front:
Caster left 5*50"
Caster right 5*50"
Camber left -1*00"
Camber right -1*00"
Toe left 0*0"
Toe right 0*0"
Total toe 0*0"
Rear:
Camber left -2*00"
Camber right -2*00"
Toe left 0*20"
Toe right 0*20"
Total toe 0*40"
Thoughts?
#5
I've been running -2.0 front and rear and total rear toe of 20" (I think). I'm happy with that setup so far. Your proposed setup would yield more understeer but be more forgiving in corners than mine. If it's a daily driver, -2.0 degrees of camber with wear unevenly, but alignments are always compromises.
Thread
Thread Starter
Forum
Replies
Last Post