How do I remove the glove box and surrounding plastic?
#1
How do I remove the glove box and surrounding plastic?
Hello all,
I'm wanting to install some switched below the glove box, but so far I am unable to remove that whole section.
There are 4 screws up top where the "secret" compartment is. - Removed those.
There is 1 screw inside of the glove box itself. - Removed.
Under the center control arm rest, there are 2 screws holding the main plastic down. - Removed.
Well 7 screws later, that thing is just as solid in there as it was before. Hoes does one go about taking that section out?
-Towels
I'm wanting to install some switched below the glove box, but so far I am unable to remove that whole section.
There are 4 screws up top where the "secret" compartment is. - Removed those.
There is 1 screw inside of the glove box itself. - Removed.
Under the center control arm rest, there are 2 screws holding the main plastic down. - Removed.
Well 7 screws later, that thing is just as solid in there as it was before. Hoes does one go about taking that section out?
-Towels
#2
Registered User
See page 2 of this DIY AP2 HU thread starting at post 31:
https://www.s2ki.com/s2000/topic/404...2/page__st__25
https://www.s2ki.com/s2000/topic/404...2/page__st__25
#5
Hey guys, i think i'm in the same spot as the OP was when this posted a year ago.
Any tips or pics would be greatly appreciated.
The pics on the other thread have died out as well.
Thanks
Any tips or pics would be greatly appreciated.
The pics on the other thread have died out as well.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post