The RijoEngineering G35C (22's/TEIN SDF/BRIDE/ETC)
#1
Registered User
Thread Starter
The RijoEngineering G35C (22's/TEIN SDF/BRIDE/ETC)
heres just a little gallery of all the stuff done so far to my brand new 2007 G35C.. purchased the car april 27th, and well after signing the papers started having everything overnighted and express sent from japan to get her completed ASAP!.
Full Mod List:
--Tein SDF
--Bride Vios3 *Ridgeback* (custom backs done in Stone from BRIDE
--Nismo wire harness X2
--Buddyclub Super Low Down Rails (on the car)
--SPC Rear Camber Kit
--Tint (limo all around and 50% on entire front windsheild)
--ARC Ti round Knob
As far as my specialty's (wheels)
First set coming next week:
22x9.5+18 3.5" lip
22x11+14 5" lip
Auto-Couture Black Label Frantic (Silver Face, chrome lip)
245/30.22 Falken 452
285/25.22 Falken 452
Set Coming June 26th:
20x9.5+13 4" lip
20x11+6 5" lip
Work VS-XX Black Chrome
235/35.20 Falken 452
275/30.20 Falken 452
Set maybe going on in august?? depending on the guy im getting them from
19x9.5+22
19x10.5+22
Volk TE-37 Tope Secret Edition
Falken 452 (not sure what sizes yet)
here are the pics:
purchased april 27th
first mod arrived 30th
then more stuff came a few days after
then i installed the tein SDF+rear camber kit+brides+tint
then i bought a new watch to match my uncoming wheels (im a big breitling fanatic.lol)
then the rear tires showd up
and then finally today the first set of wheels showed up
now monday i have the front tires coming.... set for mount/balance on tuesday which might take a little while considering im swapping the TPMS onto the 22's.
ive managed also to bypass the Weight sensor on the 07's for the passenger airbag.. so thats good, my only other task at this point on the car is to figure a way to tilt the passenger seat up and forward more to allow for rear passengers when i have some.. right now its possible to get into the back but not as comfortable as i wish it was... the rear seat gained about 5 inches of leg room although given the brides are a hellova lot narrower than the oem seats..
-Riley
***will update asap w/ wheels on pictures!
Full Mod List:
--Tein SDF
--Bride Vios3 *Ridgeback* (custom backs done in Stone from BRIDE
--Nismo wire harness X2
--Buddyclub Super Low Down Rails (on the car)
--SPC Rear Camber Kit
--Tint (limo all around and 50% on entire front windsheild)
--ARC Ti round Knob
As far as my specialty's (wheels)
First set coming next week:
22x9.5+18 3.5" lip
22x11+14 5" lip
Auto-Couture Black Label Frantic (Silver Face, chrome lip)
245/30.22 Falken 452
285/25.22 Falken 452
Set Coming June 26th:
20x9.5+13 4" lip
20x11+6 5" lip
Work VS-XX Black Chrome
235/35.20 Falken 452
275/30.20 Falken 452
Set maybe going on in august?? depending on the guy im getting them from
19x9.5+22
19x10.5+22
Volk TE-37 Tope Secret Edition
Falken 452 (not sure what sizes yet)
here are the pics:
purchased april 27th
first mod arrived 30th
then more stuff came a few days after
then i installed the tein SDF+rear camber kit+brides+tint
then i bought a new watch to match my uncoming wheels (im a big breitling fanatic.lol)
then the rear tires showd up
and then finally today the first set of wheels showed up
now monday i have the front tires coming.... set for mount/balance on tuesday which might take a little while considering im swapping the TPMS onto the 22's.
ive managed also to bypass the Weight sensor on the 07's for the passenger airbag.. so thats good, my only other task at this point on the car is to figure a way to tilt the passenger seat up and forward more to allow for rear passengers when i have some.. right now its possible to get into the back but not as comfortable as i wish it was... the rear seat gained about 5 inches of leg room although given the brides are a hellova lot narrower than the oem seats..
-Riley
***will update asap w/ wheels on pictures!
#4
Registered User
Thread Starter
Originally Posted by S2tripleO,May 18 2007, 10:30 AM
Damn Riley!! Lookin' good bro!
~23lbs front and ~24lbs rear... and if u consider the sidewall weight lost.. the overall tire+wheel weight only goes up about 10lbs per corner.. but rotational mass increased because location of the hoop compared to center.
riley
#6
Originally Posted by rijowysock,May 18 2007, 08:33 AM
ryan... it should be here saturday i hope. thanx for picking it up for me.. if u need more $ to cover the gas/old man hassle lemme know