Official Enkei RPF1 Thread
#2802
Originally Posted by WynnS123,Dec 17 2009, 10:25 AM
Get a Saner front sway bar and you will be golden running nonstaggered 17x9 +45 255's all around
With the V3's and the fsb, you can balance the car out with your compression /rebound settings, alignment, and sway bar settings . You will not regret it. In fact you'll be amazed at how capable the S is with this setup. I know I was.
With the V3's and the fsb, you can balance the car out with your compression /rebound settings, alignment, and sway bar settings . You will not regret it. In fact you'll be amazed at how capable the S is with this setup. I know I was.
#2803
Originally Posted by STAIN,Dec 16 2009, 06:05 PM
Hi, FSB? front sway bar? so you think 17x9 +45 255's all around is the optimum setup?
I used to use 17x9+45 all around.
Am now on 17x9.5+38 all around with 255's.
17x10+50 is also good if you can locate a set of BBS LM in that size or other wheel.
#2804
Originally Posted by Squirtle,Dec 17 2009, 12:14 PM
Im running the kwv3 with saner front bar. For this combo use the 255 all around. More grip everywhere is a no brainer, really.
I used to use 17x9+45 all around.
Am now on 17x9.5+38 all around with 255's.
17x10+50 is also good if you can locate a set of BBS LM in that size or other wheel.
I used to use 17x9+45 all around.
Am now on 17x9.5+38 all around with 255's.
17x10+50 is also good if you can locate a set of BBS LM in that size or other wheel.
why did you change rim size's in the enkeis?
#2805
Originally Posted by CHR!S,Dec 10 2009, 09:23 AM
gt motoring
(SHameless Plug)
Which BTW, Are now for sale if anyone wants Matte Black...
https://www.s2ki.com/forums/index.ph...f=107&t=752010
#2809
Originally Posted by STAIN,Dec 16 2009, 07:35 PM
did you have too do any fender work to make them fit?
My height is not slammed, 3.75 inches off the ground from the jacking points. hope this helps