My Ongoing Build
#52
UPDATES: January 14, 2012...i know its been a hot minute since I updated this build thread...but with moving from Hawaii to Texas and other drama...I am finally able to start a fresh rebuild from the bottom up...hope to have everything completed by the end of 2013...that gives me more than enough time to accomplish this...I plan on doing everything minus the paint
Before removing all the exterior body panels
[attachment=14645:P1140001.JPG]
The Spoon Mooncraft Hardtop with DTM Autobody tinted glass window...Will be ordering a replacement window...preferably Lexan
[attachment=14649:P1140005.JPG]
ARK DTS 76mm Single Exhaust with GT Motoring Single Exhaust Cap
[attachment=14650:P1140006.JPG]
Damage to the left side rear quarter panel...have the replacement in the back
[attachment=14651:P1140007.JPG]
Full tan interior that definitely needs some hardcore cleaning...been thinking about switching to AP2 tan seats
[attachment=14652:P1140008.JPG]
Filthy engine bay...motor and tranny will be last to get pulled...thinking about cleaning up the bay and shave and tuck it all
[attachment=14653:P1140009.JPG]
OEM powder coated valve cover
[attachment=14654:P1140010.JPG]
Up on stands with front bumper, headlights and beat rush under panel removed
[attachment=14655:P1140011.JPG]
Hood, fenders and door are gone...
[attachment=14656:P1140012.JPG]
Same over on the driver side
[attachment=14657:P1140013.JPG]
Filthy wiring...might spring for new wiring too
[attachment=14658:P1140014.JPG]
Definitely need a new radiator support before the Mishimoto one goes in
[attachment=14659:P1140015.JPG]
Think its time to replace the exhaust manifold and maybe the bolts too...or spring for a new engine
[attachment=14660:P1140016.JPG]
Worst audio setup/splicing I have ever seen...I shoulda looked at the craftsmanship when it was first installed...I didnt even know that they used crossovers...completely unnecessary
[attachment=14661:P1140017.JPG]
Has now become a storage space for tools and various parts
[attachment=14662:P1140018.JPG]
Before removing all the exterior body panels
[attachment=14645:P1140001.JPG]
The Spoon Mooncraft Hardtop with DTM Autobody tinted glass window...Will be ordering a replacement window...preferably Lexan
[attachment=14649:P1140005.JPG]
ARK DTS 76mm Single Exhaust with GT Motoring Single Exhaust Cap
[attachment=14650:P1140006.JPG]
Damage to the left side rear quarter panel...have the replacement in the back
[attachment=14651:P1140007.JPG]
Full tan interior that definitely needs some hardcore cleaning...been thinking about switching to AP2 tan seats
[attachment=14652:P1140008.JPG]
Filthy engine bay...motor and tranny will be last to get pulled...thinking about cleaning up the bay and shave and tuck it all
[attachment=14653:P1140009.JPG]
OEM powder coated valve cover
[attachment=14654:P1140010.JPG]
Up on stands with front bumper, headlights and beat rush under panel removed
[attachment=14655:P1140011.JPG]
Hood, fenders and door are gone...
[attachment=14656:P1140012.JPG]
Same over on the driver side
[attachment=14657:P1140013.JPG]
Filthy wiring...might spring for new wiring too
[attachment=14658:P1140014.JPG]
Definitely need a new radiator support before the Mishimoto one goes in
[attachment=14659:P1140015.JPG]
Think its time to replace the exhaust manifold and maybe the bolts too...or spring for a new engine
[attachment=14660:P1140016.JPG]
Worst audio setup/splicing I have ever seen...I shoulda looked at the craftsmanship when it was first installed...I didnt even know that they used crossovers...completely unnecessary
[attachment=14661:P1140017.JPG]
Has now become a storage space for tools and various parts
[attachment=14662:P1140018.JPG]
Thread
Thread Starter
Forum
Replies
Last Post
Randizzle88
Member S2000 Classifieds and For Sale
20
09-10-2008 11:45 PM
Randizzle88
Socal Swap Meet
35
11-10-2007 08:42 PM