Cusco Roll Bar and Corbeau Seats pics.
#21
Originally posted by S2K1
Owenxguo-Around $600, it was supposed to come w/a harness bar, but it didn't so the shop that ordered the roll bar made one for me for free.
Owenxguo-Around $600, it was supposed to come w/a harness bar, but it didn't so the shop that ordered the roll bar made one for me for free.
#25
Registered User
Thread Starter
Join Date: Jul 2001
Location: SLC, UT
Posts: 28,465
Likes: 0
Received 0 Likes
on
0 Posts
Here are some more pics I took yesterday. The first one shows the contrast of the seats and the car, and the last two are pics that munckee requested showing where the seat hits the door.
The rollbar in it's current state is not removable, but I can make it removable if I want. I probably won't though because I don't need the secret compartment and when I put harnesses on there, I don't want to take them off when I take the rollbar off. No cutting was necessary to make the rollbar fit.
The rails I used were from Corbeau specifically for the S2000. The rails were $80/each and the seats I am not allowed to say, my friend works at Corbeau and he got them for me at cost.
The rollbar in it's current state is not removable, but I can make it removable if I want. I probably won't though because I don't need the secret compartment and when I put harnesses on there, I don't want to take them off when I take the rollbar off. No cutting was necessary to make the rollbar fit.
The rails I used were from Corbeau specifically for the S2000. The rails were $80/each and the seats I am not allowed to say, my friend works at Corbeau and he got them for me at cost.
#28
Registered User
Join Date: Dec 2001
Location: encino
Posts: 1,792
Likes: 0
Received 0 Likes
on
0 Posts
It does look great. Hopefully mine will be here some time this century.
Mine will look very very similar. Depending on which seats i decide on going with. The Corbeau Pro Sport or some kinda Bride. For small people like me, Bride's really are amazing.
Question for you on the seat height. By the look of it, your sitting in the stock height position. Any way to lower it? YOu could probably go down a few inches if the seats were bolted directly to the floor right?
Regardless, nice work
Mine will look very very similar. Depending on which seats i decide on going with. The Corbeau Pro Sport or some kinda Bride. For small people like me, Bride's really are amazing.
Question for you on the seat height. By the look of it, your sitting in the stock height position. Any way to lower it? YOu could probably go down a few inches if the seats were bolted directly to the floor right?
Regardless, nice work
#29
Registered User
Join Date: Sep 2002
Location: Charlotte
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
How is the roll bar installed w/o cutting? especially the back bars. And did they tell you how easily removable it can be made? I need a rollbar, but am too big to make one a perminant fixture so it has to be removable.