you MUST run 18" wheels to obtain these tire sizes!!!! I want to fit the 295 and still have the look of a 17x9.5 +40 with a 255!!! obviously with a wider tire and wheel width you will have to sacrifice offset!!!

I plan on running these in 18x10.5 +60 with 295 neova's (approx a 11.5 inch treadwidth) compared to my now +63 255 RE01R's 9.4 inch treadwidth) So If you take my 9 inch +63 with a 255 I assume I should add an inch on both sides of the tire for the 295!!! So basically a 10.5 +63 with a 295 neova will fit similar to a 9 +40 with a 255 REO1R!!! given approx 25mm=1 inch


THIS IS THE WHEEL I WANT.... feedback please THE SALE ENDS TOMORROW!!! 25%off

Its one of two extra light forgeline wheels....


on this car





good idea????

 

same wheel... ball polished/polished

 

You seem to have it down, why are you asking?

 

I think a good idea would be to paint those fenders.

 

 

more or less want feedback on the wheels themselves...

and the 225/295 setup compared to 225/255

 

here is an 18x11 with about a 65 offset. 285/295 30/18

I would do something similar in terms of fitment on a narrow body S, if you don't want to stretch.

 

thinking this color combo on the other wheel

 

225/295 is not a balance staggered setup, IMO.

 

i think its way off balance as well..

why do you want such a stagger? if you want to run those tires in the rear.. why not run 255 or 265 in the front?