charsu

how much pull and camber?
my balanced set-up for looks + performance is 17x9 +45 front with 225/40.
rear is where im scurred. i want same specs as yours, 17x9.5 +38 with 255. but im weary of the fender rape-age.
jaaammoooonnnnn spill the beans on how to make them fit!!! TIAdvance

trymev8

stock fenders just rolled and pulled slightly

PsykotiK

its fits fine.. a little rubbing.. but im about to fix that.. 3 degrees of camber roll, and relocate the tab for sure.. the key is to make sure you flare it pretty good.. i think i got a good 15mm flare on it, but im going up to a 245 and take off the spacers i have on there

Randizzle88

17x9 +35 255/40/17
front dont fit flush still but hey they work with out rubbing
Key is
* Flare the shit out of the front
* Cut rear and relocate also roll.
* Ride height
* Camber

Dressed2Kill

8in 25et front with 225 and 9in 35et rear with 245

RIVAL MACHINE

anyone got pics of 9.5+38 or+40 up front?

Antonov

9.5+38 w/255 star spec

RIVAL MACHINE

you have that setup or you want to see that setup aswell? i was wondering also how much camber would you have to run to make that work considering that you'd have to pull the fenders.

o'malley_808

My Sh***ttt dontt fitt

18x8+35 in the front with 225/35-18
18x9+35 in the rear with 265/35-18

All fenders are rolled, rear tab relocated, and rear bumper is shaved and thats about it so far.

Fronts fit perfect but rears need work....Anyone have any idea how I can get these to fit without pulling the rear fenders? Or do I need to get rear overfenders/pull?

I tried adjusting both camber adjustment bolts on the bottom control arm and it still didnt clear (Dont worry I marked off where it was at and put it back)

I have no idea what my current camber spec is so dont bother asking

lychyrychy

265 in the rear? Geez thats heavy you don't need all of it. Solution get 255 size instead and dial in some camber