★☆ 2004 Spoon S2000 Coupe ☆★
01-29-2010, 11:39 AM
#331
Registered User
Thread Starter
Join Date: May 2006
Location: 13851 A Better Way #11D, Garden Grove, CA 92843
Posts: 5,486
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by trunger,Jan 29 2010, 11:36 AM
that muffler looks like a cherry bomb.. haha
Hopefully the car won't catch on fire. 
02-02-2010, 02:55 PM
#333
Registered User
Originally Posted by AlexS2200,Jan 18 2010, 07:36 PM
My New Spec Header / Exhaust from L★Con Race Cars. Both made together with only slip/spring kit separating them apart into two pieces.
L★Con calls this the Triple Eight 4-1 Race Header & Exhaust system.
Specs:
The header and exhaust is made out of 304 Stainless.
Primaries are 1.75 inch (44.45mm)
Secondaries are 1.875 inch (47.62mm)
Tertiaries are 2 inch (50.80mm).
All four runners are 24 inch (equal length)
Each runner size transition is 8 inches (hence name Triple 8)
The runners are strategically placed in firing order to create a vortex spiral exiting the collector into the exhaust.
The collector slips together merging the 4 runners into a 4-1 design with a 2 1/4 inch (57.15mm) outlet into a MegaPhone opening it out to 2 1/2 inch (63.5mm).
The exhaust has a slip/spring transition from 2 1/2 inch to 3 inch piping.
The muffler is a (Repackable) 17 inch long 3 inch (76.2mm) bullet can design connected via T bolt clamp.
L★Con calls this the Triple Eight 4-1 Race Header & Exhaust system.
Specs:
The header and exhaust is made out of 304 Stainless.
Primaries are 1.75 inch (44.45mm)
Secondaries are 1.875 inch (47.62mm)
Tertiaries are 2 inch (50.80mm).
All four runners are 24 inch (equal length)
Each runner size transition is 8 inches (hence name Triple 8)
The runners are strategically placed in firing order to create a vortex spiral exiting the collector into the exhaust.
The collector slips together merging the 4 runners into a 4-1 design with a 2 1/4 inch (57.15mm) outlet into a MegaPhone opening it out to 2 1/2 inch (63.5mm).
The exhaust has a slip/spring transition from 2 1/2 inch to 3 inch piping.
The muffler is a (Repackable) 17 inch long 3 inch (76.2mm) bullet can design connected via T bolt clamp.
WoW that looks awesome !!! that's one crazy setup Alex !!! 
-LAW-
02-02-2010, 03:09 PM
#334
Registered User
Thread Starter
Join Date: May 2006
Location: 13851 A Better Way #11D, Garden Grove, CA 92843
Posts: 5,486
Likes: 0
Received 1 Like
on
1 Post
Fresh out of the body shop!! Time to put her back together and back on the road.
Looks the same right? Hint: 15lb carbon doors painted
Looks the same right? Hint: 15lb carbon doors painted
03-02-2010, 08:39 AM
#337
Registered User
Thread Starter
Join Date: May 2006
Location: 13851 A Better Way #11D, Garden Grove, CA 92843
Posts: 5,486
Likes: 0
Received 1 Like
on
1 Post
Hard work paid off. Won 1st Place at Wekfest (aka J's Gathering) Show for best S2000.
Time to go bust up this new paint job at the race track. LOL
Time to go bust up this new paint job at the race track. LOL
03-02-2010, 09:33 AM
#339
Car looks great. That header looks awesome. I wish the muffler had a slightly longer tip on it but I bet it functions 110% like it's supposed to. that thing has to sound awesome.
you running the 17x9 +40s all around? you need to trade me the lighter silver for mine
you running the 17x9 +40s all around? you need to trade me the lighter silver for mine
