The Ultimate GReddy Turbo Kit Thread
08-06-2009, 08:29 PM
#561
Registered User
Join Date: Jul 2009
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
question, greddy claims the kit is safe to drie out of the box, others say get a tune, some say dont even drive it to the tuners, trailer it. if you use the base map it should be good to drive right?
08-07-2009, 07:23 AM
#563
Registered User
Join Date: Oct 2007
Location: Annapolis MD
Posts: 2,259
Likes: 0
Received 0 Likes
on
0 Posts
You can drive it to the tuner, it may not run great but it should be more than fine. Now if you run a TP and large exhaust be super careful. But the base map was tuned with a 80mm single and a stock cat. Anything other than the stock cat you should not boost with out a tune. Also the tune will let your run better and you can turn up the boost to make more power with a boost controller.
So get a good boost controller
A Berk 63 HFC which may or may not be needed if you use a 70mm single
And an 60-70mm exhaust nothing bigger
So get a good boost controller
A Berk 63 HFC which may or may not be needed if you use a 70mm single
And an 60-70mm exhaust nothing bigger
08-07-2009, 03:36 PM
#567
Join Date: Apr 2006
Location: Clifton, NJ
Posts: 7,852
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2006ap2,Aug 7 2009, 07:09 PM
i bought the greddy kit, havent got it yet though, its on backorder. i should get it within the next month.
Have fun with it
08-13-2009, 02:44 PM
#568
Registered User
Join Date: Mar 2006
Location: socal
Posts: 3,248
Likes: 0
Received 0 Likes
on
0 Posts
i want to put a turbo blanket on the turbo... do i need to remove the turbo for this? or this will just go on from underneath without removing stuff? like this one... http://cgi.ebay.com/ebaymotors/Turbo-beeni...sQ5fAccessories
08-13-2009, 05:39 PM
#569
Registered User
Join Date: May 2008
Location: Northern Cali
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
When I put mine on I had to cut it to fit our turbo because of the external WG. That one is probably the same which means you have to take the turbo off to custom fit it. it pretty easy just use a pair of sharp shears. I used some mechanics wire to hold it on the turbo since I had to cut the eyelits off.
