Josh_With_The_S2K

^ since it eliminated the cat completely?


- thanks
Josh

Revenge

yes you could run a 70mm single and a berk HFC, but the cold weather is also a factor, so when it's cold you may have more creep then when it's warm out. If you live south you should have fewer problems then people up north.

Chris_Lum

likely with a test pipe. no creep with stock cat, and maybe no creep with a HFC.

Josh_With_The_S2K

Well from what i know about that exhaust is that it eliminates the cat. so its basically a test pipe i would assume. right?


- Josh

asukadc

guys, what are the nut size for the exh manifold studs? i guess i'm missing one when i inspect my car, probably didn't tighten enough on this end piece, or maybe i just never got it on, see pic below

devs2k

^ those have come loose on me as well; did you look in the greddy manual PDF to see if it has the sizes?

Revenge

Is that the OLD school mani, I traded mine in cause I was afraid it would crack.

asukadc

nope, i guess i gotta figure this out.

devs2k

it should be 8 x 1.25 mm

asukadc

so i called the local dealership and picked up the bolts, 3 bucks a pop, didn't want to wait for shipping from magistic...

pics...






there were 2 missing , one on the very end towards the filter, one on the lower side of runner 2.

the bottom one was A BITCH to fasten, check your bolts often guys, and i checked all other bolts, there were one, the 3rd one on top i could turn about 1/4 of a turn,