Turbo Ready!
04-16-2008, 09:41 AM
#51
Registered User
Thread Starter
Join Date: Dec 2003
Location: Schaumburg
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by s2kswe,Apr 16 2008, 09:16 AM
Even if I don't have any good advice to give you, I really like reading your thread. Nice setup you got there.
I have the ILP kit coming my way anytime soon(just waiting for Chris to ship it out).
One thing in common is the "small" turbine housing. I have the .48 coming too. So I am very intrested in your experiences with it. (My turbo will be the gt3076r)
Wish you best of luck with the upcoming tune etc!
Regards from Sweden
I have the ILP kit coming my way anytime soon(just waiting for Chris to ship it out).
One thing in common is the "small" turbine housing. I have the .48 coming too. So I am very intrested in your experiences with it. (My turbo will be the gt3076r)
Wish you best of luck with the upcoming tune etc!
Regards from Sweden
! I will keep you guys posted.. Along with dyno numbers and pics! 
04-22-2008, 05:10 AM
#52
Registered User
Thread Starter
Join Date: Dec 2003
Location: Schaumburg
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys I'm finally happy to say my car has been tuned thanks to Mikey at Profunction! My car dyno'd 351whp @ 12psi 7k rpms! The dyno pull was only till 7k rpm because the clutch was slipping. I drove the car yesterday and today I think the only issue is I dont see full boost till about 6,500-7k rpms. This thing really moves when it gets going! Turbo is the best thing i've done to this s2k!
Boost controller is all the way down
running off a 4psi external wastegate spring (its holds full boost (12psi) at around 6-7k rpms)???
78,000 miles (stock clutch)
I think the issue might be xs power external wastegate?..
Future plans
ACT 6 puck clutch
3 inch dp and full exhaust
18psi
I should be doing over 400whp once everything is ready.
Thanks to
Ya inline pro
Chris inline pro
Mikey (profunction)
Wilke Inc (install)
I couldn't have done it without them!
Turbo is the best thing i've done to this s2k! Boost controller is all the way down
running off a 4psi external wastegate spring (its holds full boost (12psi) at around 6-7k rpms)???
78,000 miles (stock clutch)
I think the issue might be xs power external wastegate?..
Future plans
ACT 6 puck clutch
3 inch dp and full exhaust
18psi
I should be doing over 400whp once everything is ready.
Thanks to
Ya inline pro
Chris inline pro
Mikey (profunction)
Wilke Inc (install)
I couldn't have done it without them!
05-05-2008, 06:05 PM
#53
Registered User
Thread Starter
Join Date: Dec 2003
Location: Schaumburg
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Finally some pics! I still need ACT 6 Puck Clutch! 3 inch full exhaust! (18psi-20psi) Car was only tuned up to 7,000 rpm's! (12psi) (1.5 hr tune) All comments are appreciated.
I still need ACT 6 Puck Clutch! 3 inch full exhaust! (18psi-20psi) Car was only tuned up to 7,000 rpm's! (12psi) (1.5 hr tune) All comments are appreciated.
05-06-2008, 05:08 AM
#58
Registered User
Thread Starter
Join Date: Dec 2003
Location: Schaumburg
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Spec_Ops2087,May 5 2008, 08:49 PM
Nearly too much
. I plan to get tial 38mm wg asap!
05-06-2008, 05:11 AM
#59
Registered User
Thread Starter
Join Date: Dec 2003
Location: Schaumburg
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 03silver2000,May 5 2008, 08:04 PM
one question what state are you located in?... Looks like a mass. plate in the window? could be wrong tho. congrats nice numbers!!!
