Timing?
#12
Let's stick to the topic on what others are running. I don't need the whole map, just what it is towards redline, specifically a log manifold and on pump gas (please state 91 or 93 octane).
#13
Registered User
Originally Posted by purekoryo,Jan 3 2011, 09:55 AM
Let's stick to the topic on what others are running. I don't need the whole map, just what it is towards redline.
This topic is pointless, you don't know why the timing was were it was.
Different setups.
Stroke
Manifold
Gas
Meth
etc
The list goes on, asking for timing @ X psi is pretty pointless.
#14
Originally Posted by siadam,Jan 3 2011, 11:47 AM
lol.
This topic is pointless, you don't know why the timing was were it was.
Different setups.
Stroke
Manifold
Gas
Meth
etc
The list goes on, asking for timing @ X psi is pretty pointless.
This topic is pointless, you don't know why the timing was were it was.
Different setups.
Stroke
Manifold
Gas
Meth
etc
The list goes on, asking for timing @ X psi is pretty pointless.
#15
Registered User
Hey,
Here is a screenshot of my high-cam map from flashpro
so, as you can see goes down to around 21 degree's on the map at redline, in reality this would be slightly lower due to the induvidual cylinder trims...
So around 19 to 21degree's depending on which cylinder you look at.
This is on a supercharged F20c at 11psi.
Dan
Here is a screenshot of my high-cam map from flashpro
so, as you can see goes down to around 21 degree's on the map at redline, in reality this would be slightly lower due to the induvidual cylinder trims...
So around 19 to 21degree's depending on which cylinder you look at.
This is on a supercharged F20c at 11psi.
Dan
#17
I'll probably get it tuned this Spring. I just want to see the ball park range, so I know what the range and max limit should be when my future tuner calibrates.
Please continue to post your timing guys. thanks.
btw, for other viewers, please do not go off of these posts as your tune. Like I said I just want to know what the range should be.
Please continue to post your timing guys. thanks.
btw, for other viewers, please do not go off of these posts as your tune. Like I said I just want to know what the range should be.
Thread
Thread Starter
Forum
Replies
Last Post
MIs2000
S2000 Forced Induction
18
03-28-2012 05:31 AM