Supra V160 Getrag Conversion
#731
I missed it somewhere in the 31 pages. How much is this kit? I have a line on a new V160 this girl bought for automatic Supra but never put it in. Been sitting in plastic for 2 years.
#733
#736
I am in the process of building the K 24 stroker motor with the V161 Transmission. We have run into a problem with the transmission hitting the starter while using the full-blown motorsports mounting hardware.
Have you encountered that same problem?
Thanks,
Jeff
Have you encountered that same problem?
Thanks,
Jeff
#738
After paying almost $7000 for this kit they don't tell you that kind of crap?
After installing the entire differential the actual hubs are the incorrect size for the axle to protrude through.
None of the rear differential hardware provided by full-blown motorsports aligned with the machined holes. This required additional jigging and drilling.
I will never ever buy another full-blown product!!!!
After installing the entire differential the actual hubs are the incorrect size for the axle to protrude through.
None of the rear differential hardware provided by full-blown motorsports aligned with the machined holes. This required additional jigging and drilling.
I will never ever buy another full-blown product!!!!
#739
Originally Posted by passmans2kny' timestamp='1391001872' post='22988616
u have to notch the trans
After installing the entire differential the actual hubs are the incorrect size for the axle to protrude through.
None of the rear differential hardware provided by full-blown motorsports aligned with the machined holes. This required additional jigging and drilling.
I will never ever buy another full-blown product!!!!
lmao it clearly states in the v160 installation instructions with pics to notch the tranny housing