Supra V160 Getrag Conversion
#601
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
I am getting nothing on the cluster, the speedo healer is seeing 12v from the o2 sensor that wasnt being used, I ran test mode on the speedo healer and got the t to flash when i put it in first gear indicating its wired correctly, I used 36500 as the calibration, then tried a few more ranging both ways with no luck so far, this was on jack stands with the tires just spinning, dont really know where to go from here, my buddy did the wiring and has the speedo healer going into the back of the aem, the toyota vss clip is spliced into the honda wiring the way the full blown diagram said to.. any help would be greatly appreciated, I wanna get this working so more people can do this easily in the future too
![ponder2.gif](https://www.s2ki.com/forums/images/smilies/ponder2.gif)
#602
Registered User
![](https://staticssl.ibsrv.net/autocomm/Content/S2Ki/milestonestars-15yr.png)
Join Date: Dec 2005
Location: huntington long island
Posts: 5,651
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
I was browsing around the internet to see if I can find the frequency output from our VSS sensors. Assuming the values posted in the forums were correct, the s2k VSS is ~37.6 times faster relative to the v160. Try to set your calibration somewhere around 37 and see what happens.
#603
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Originally Posted by passmans2kny' timestamp='1341544001' post='21837456
I am getting nothing on the cluster, the speedo healer is seeing 12v from the o2 sensor that wasnt being used, I ran test mode on the speedo healer and got the t to flash when i put it in first gear indicating its wired correctly, I used 36500 as the calibration, then tried a few more ranging both ways with no luck so far, this was on jack stands with the tires just spinning, dont really know where to go from here, my buddy did the wiring and has the speedo healer going into the back of the aem, the toyota vss clip is spliced into the honda wiring the way the full blown diagram said to.. any help would be greatly appreciated, I wanna get this working so more people can do this easily in the future too
![ponder2.gif](https://www.s2ki.com/forums/images/smilies/ponder2.gif)
Originally Posted by 99SH' timestamp='1341548594' post='21837591
I was browsing around the internet to see if I can find the frequency output from our VSS sensors. Assuming the values posted in the forums were correct, the s2k VSS is ~37.6 times faster relative to the v160. Try to set your calibration somewhere around 37 and see what happens.
#605
#606
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
[/quote]
Agreed, we'll eventually get this all figured out
![thumbsup.gif](https://www.s2ki.com/forums/images/smilies/thumbsup.gif)
#607
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Originally Posted by 99SH' timestamp='1341548594' post='21837591
I was browsing around the internet to see if I can find the frequency output from our VSS sensors. Assuming the values posted in the forums were correct, the s2k VSS is ~37.6 times faster relative to the v160. Try to set your calibration somewhere around 37 and see what happens.
#609
#610
![Default](https://www.s2ki.com/forums/images/icons/icon1.gif)
Here is a test of the SH. Set the SH into test mode and this will appear on your dash. If you see this you will know your SH is wired properly
http://www.youtube.com/watch?v=NJOOw6NAtYA&feature=plcp
![thumbsup.gif](https://www.s2ki.com/forums/images/smilies/thumbsup.gif)
http://www.youtube.com/watch?v=NJOOw6NAtYA&feature=plcp