SiCK HONDA

I need to verify whether or not this is a stock AP2 pulley... I bought my kit used, and it was for an AP2. This was the leftover pulley in the box, as I used the smaller pulley that the previous owner was using....

I am selling this to another member, and I need verification that this is indeed the stock AP2 pulley from the Comptech S/C kit.

It measures right at 4.5 inches OUTSIDE DIAMETER. The ruler is in 1/10's of an inch, btw...



Thanks,
Matt

SiCK HONDA

Bump...

Anyone? Bueller? Bueller?

Jano

I'll measure mine later when I get home and post if no one has answered by then.

gomarlins3

As quoted from SuperCharged_AP1:
Vortech SC Kit

Stock pulley size: 5" (7psi) Belt: 4060510
4.75" (8psi) Belt: 4060505
4.50" (9psi) Belt: 4060500
4.25" (10psi) Belt: 4060500
4.00" (11psi) Belt: 4060500 or 4060495
3.75" (12psi) Belt: 4060495
3.50" (13psi) Belt: 4060495
3.25" (14psi) Belt: 4060495

Comptech SC Kit

Stock pulley size: 4.30" (5.5psi) Belt: 4060400
4.25" (6psi) Belt: 4060395
4.00" (7psi) Belt: 4060390
3.75" (8psi) Belt: 4060390
3.50" (9psi) Belt: 4060385
3.25" (10psi) Belt: 4060380
3.00" (11psi) Belt: 4060370

batikan

That SuperCharged_AP1 would be me

anyways, the numbers I provided was for AP1's if I remember correct

SiCK HONDA

I'm assuming that the measurements are for the inside diameter, correct? So the one I have SHOULD be the 4.3" inside diameter... ?