PTUNING S2000 Turbo System (Pics, Dyno, Pricing)
#2431
Found this today. I know that it has happened to a few people with this kit. About 3000 miles or less with the kit installed. FYI: I did install a Hasport driver's side motor mount (62A stiffness) about 1000 miles after the the kit was installed.
What is the solution to this problem?
Thanks
[attachment=27750:Broken Intake.jpg]
What is the solution to this problem?
Thanks
[attachment=27750:Broken Intake.jpg]
#2433
Seems like this is a common problem.Mine did the same thing.. Contact ptuning and they will fix it for you. Took care of mine right away. for the quick service.
Sent from my Galaxy S II using Tapatalk
Sent from my Galaxy S II using Tapatalk
#2436
Registered User
Join Date: Jun 2004
Location: SoCaL
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
mine broke too. i just used zip ties to my front strut bar to hold the intake tube up for the last 3 months...can't find any shops around that does aluminum welding to get it fixed
#2437
Registered User
Join Date: Jan 2011
Location: PTUNING
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
The Website is up and running. Please try again. We apologize for any inconvenience.
mine broke too. i just used zip ties to my front strut bar to hold the intake tube up for the last 3 months...can't find any shops around that does aluminum welding to get it fixed
For future reference when tightening down your intake tube. Please use the following steps.
>> During re-installation the brackets on both the intake and the engine
>> should be installed first with the supplied hardware. After the
>> intake is in place that is when you tighten down the t-bolt clamp
>> holding the silicone coupler to the intake tube. Next go back and
>> re-tighten the bolt and nut on the brackets. Installing it this way
>> will help prevent the silicone coupler from flexing and twisting.
Thanks Drew. R
#2439
Registered User
Join Date: Jan 2011
Location: PTUNING
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts