PTUNING S2000 Turbo System (Pics, Dyno, Pricing)
#2071
i did 13.17 at track today on some bs worn out nexen 3000 tires,in 1/4 mile. on evans etune 12 psi, no launching just pulling out hole nice. hoping some slicks, a more agressive tune will yield me better numbers. i went to a track in fayettville nc, i realized alot people havent heard of you guys had lots of questions bout the kit.. gtx30r turbo. 2006 s2000 2.2 engine. was first time ever i ran at a track
reaction 1.4085
60ft 2.39
330ft 5.9668
1/4 e/t 13.17
1/4mph 113.39
reaction 1.4085
60ft 2.39
330ft 5.9668
1/4 e/t 13.17
1/4mph 113.39
#2074
If when you guys install the kit and hear compressor surge the problem is with the BOV. It comes with 2 springs pre-installed (1 with blue painting and one with pink painting). Open up the BOV using the supplied wrench and remove the blue spring leaving only the pink. The car will sound much better and the compressor surge will be eliminated.
#2076
If when you guys install the kit and hear compressor surge the problem is with the BOV. It comes with 2 springs pre-installed (1 with blue painting and one with pink painting). Open up the BOV using the supplied wrench and remove the blue spring leaving only the pink. The car will sound much better and the compressor surge will be eliminated.
#2077
Registered User
Join Date: Jun 2004
Location: SoCaL
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
i did 13.17 at track today on some bs worn out nexen 3000 tires,in 1/4 mile. on evans etune 12 psi, no launching just pulling out hole nice. hoping some slicks, a more agressive tune will yield me better numbers. i went to a track in fayettville nc, i realized alot people havent heard of you guys had lots of questions bout the kit.. gtx30r turbo. 2006 s2000 2.2 engine. was first time ever i ran at a track
reaction 1.4085
60ft 2.39
330ft 5.9668
1/4 e/t 13.17
1/4mph 113.39
reaction 1.4085
60ft 2.39
330ft 5.9668
1/4 e/t 13.17
1/4mph 113.39
#2078
Originally Posted by miguel329' timestamp='1327888825' post='21364154
i did 13.17 at track today on some bs worn out nexen 3000 tires,in 1/4 mile. on evans etune 12 psi, no launching just pulling out hole nice. hoping some slicks, a more agressive tune will yield me better numbers. i went to a track in fayettville nc, i realized alot people havent heard of you guys had lots of questions bout the kit.. gtx30r turbo. 2006 s2000 2.2 engine. was first time ever i ran at a track
reaction 1.4085
60ft 2.39
330ft 5.9668
1/4 e/t 13.17
1/4mph 113.39
reaction 1.4085
60ft 2.39
330ft 5.9668
1/4 e/t 13.17
1/4mph 113.39
#2079
Registered User
Join Date: Jan 2011
Location: PTUNING
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
I have posted up our February special. Check out the link below for this months S2ki promotion!!!
Thanks Drew.
https://www.s2ki.com/s2000/topic/925...#entry21367040
Thanks Drew.
https://www.s2ki.com/s2000/topic/925...#entry21367040
#2080
Registered User
Originally Posted by drzchulo147' timestamp='1327951931' post='21366355
If when you guys install the kit and hear compressor surge the problem is with the BOV. It comes with 2 springs pre-installed (1 with blue painting and one with pink painting). Open up the BOV using the supplied wrench and remove the blue spring leaving only the pink. The car will sound much better and the compressor surge will be eliminated.
You should not remove any of the springs in the BOV. We specifically had Turbosmart spec our BOV with the dual springs (blue and pink spring) since the s2k motor draws around 20-22in/hg vacuum at idle. If you are truely experiencing compressor surge (air backing up to the compressor wheel causing it to want to stall) due to the BOV not opening when TB is closed, then there is a chance that your vacuum line to the BOV is not connected to the proper vacuum source. We have had a few customers accidentally connect the vacuum line from the BOV to the WMI (water meth injection nozzle) port on the billet IAT sensor/vac block plate on the upper intercooler piping (near the throttle body). Please verify that your vacuum line is properly corrected to the correct vacuum source. Feel free to send us a picture of your BOV vaccum line connection for us to help you confirm the installation.
If you run the BOV with just the smaller inner spring (pink), you may experience the BOV fluttering when you're on and off the throttle.
MrC