PTUNING S2000 Turbo System (Pics, Dyno, Pricing)
#1781
Registered User
Join Date: Jun 2007
Location: Central NJ
Posts: 4,374
Likes: 0
Received 0 Likes
on
0 Posts
I would like to know as well. It is hot in there after a two hour long drive but it hasn't affected anything in my bay. The battery is actually not hot at all and the oil filter is fine....
#1783
Registered User
MrC
#1784
Registered User
Join Date: Jan 2011
Location: PTUNING
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
#1786
Registered User
2500 miles on the kit.
Swapped out the stock fuel pressure regulator, upped the fuel output and retuned a bit.
Final Tune: 528.1 HP, 351.1 TQ, 23-Psi Boost, on 92-Octane
[media]http://www.youtube.com/watch?v=Tx_wXXoyD80[/media]
Here's another one from one of the 1st pulls, but the video and sound quality is a lot better....you can really hear the PTuning Dual Exhaust
[media]http://www.youtube.com/watch?v=FP19NPtUhNU[/media]
We've just about tapped out what the 92-Octane gas can output with the set-up "As Is"....I can say "All Done"...!
Thanks again to the guys at Speed Factory Racing and the PTuning fellas.
Swapped out the stock fuel pressure regulator, upped the fuel output and retuned a bit.
Final Tune: 528.1 HP, 351.1 TQ, 23-Psi Boost, on 92-Octane
[media]http://www.youtube.com/watch?v=Tx_wXXoyD80[/media]
Here's another one from one of the 1st pulls, but the video and sound quality is a lot better....you can really hear the PTuning Dual Exhaust
[media]http://www.youtube.com/watch?v=FP19NPtUhNU[/media]
We've just about tapped out what the 92-Octane gas can output with the set-up "As Is"....I can say "All Done"...!
Thanks again to the guys at Speed Factory Racing and the PTuning fellas.
#1789
Ugh... makes me wish I would have waited for a .82 AR to be in stock before putting the turbo on my car... I have a 1.06 housing now, just need to swap it out and get a retune and I should make similar numbers i hope!
#1790
Registered User
Hey Blucky....Glad to hear everything is still going / working well on your car. I'm curious / confused though: I was just reading through your thread and thought that you originally had the 1.06 A/R hot-side...and were going to swap that out for the smaller .82 A/R...to give you the quicker spool that you were looking for...? Did you already make the change?