Ehren

We are having a problem with the Precision 600 intercooler.
When we mounted like it was suggested it sits two low, it needs to be moved up about 3 inches, which seems nearly impossible with how high the bolt holes are one the end tanks.
I know the Inline pro fits up between the frame rails because they use thier own end tanks. On the other hand the 600 with factory end tanks dont.

Here are pics.


Any help would be appreciated

Ehren

It didnt seem that anyone had any suggestions, so this is what I did.

The best part is that it is twice as strong as the aluminum L brackets

5thelement

I had that similar problem i had to cut a little bit a weld on a bracket actually looks alot better now but i have a c-west front

pushin9

yeah I am the other person having the same problem. With the frame notched out and the intercooler raised up like you have it in the last pictures looks perfect!! I just hate the thought of cutting that out of there.

You must have just done that today?

any other precision 600 users out there with how they mounted their intercooler?

Ehren

-Greg

Ehren

Yep just finished her up and took pics.

A new problem has arised with the size of my turbo.

DOH

5thelement

wow is it hiting the frame

ChefJ

I am going to be having the same problem. Just a quick question. What size are the bolts for mounting??

pushin9

The thread size is 5/16 coarse thread

Ehren

5/16-18

ChefJ

Awesome thanks guys. What size bracket is that you are using?? 4"x2" ?? thanks again.