opinions on sheepy turbo kit
#51
I am running a sheepey twinscroll manifold downpipe combo. I am using a t4 gt3582r divided 1.06.
Car runs great and spools up very quickly I am running a aeromotive 340 and 1d1k's on this 2006 dbw setup I am at 97% duty and a tad lean so I am at my 450whp max output on this fuel setup.
In the spring I am getting a sos return kit, walbro 416lph pump, catch can setup and swain white lightening coat all the hot parts.
Goal is 500pump 93 and 650 c16. E85 would be nice but it seems like a hasle with storage and % inconsistencies.
Brent
Car runs great and spools up very quickly I am running a aeromotive 340 and 1d1k's on this 2006 dbw setup I am at 97% duty and a tad lean so I am at my 450whp max output on this fuel setup.
In the spring I am getting a sos return kit, walbro 416lph pump, catch can setup and swain white lightening coat all the hot parts.
Goal is 500pump 93 and 650 c16. E85 would be nice but it seems like a hasle with storage and % inconsistencies.
Brent
#55
His site isn't the best out there by any means. But Alex really pours his heart and soul into all of the products he puts out, and will build you anything you ask for!
Check them out on FB he posts a TON of pictures of his work.
Check them out on FB he posts a TON of pictures of his work.
#57
on this kind of manifold you not better use a gtx3076r for maximum spool ? anyway the gtx3076 can make easely 450 whp ? in the gtx30 serie u can ave a gtx3082r with divided 1.06 ar ?
#58
#59
Why go that small? The boost comes on so quick (3k) with the t4 gt3582r 1.06 I can't imagine anything smaller on a twinscroll setup and you will see 450hp at only around 12psi. Might as well go supercharger if you want something quicker than that and only see 450hp.
Brent
#60
Registered User
Thread Starter
I planed on using there single scroll so that could slow down spool so I was looking at the 30r. That not a good choice for a single scroll that can hit 500whp?