Oil pressure gauge install
#1
Oil pressure gauge install
Hey guys i did some research for installing a mechanical oil pressure gauge and before i attempt this i want to be assured of my doing.
So im going to have a fitting running from the block into a hose. From that hose to the stock oil pressure sender and then attach a T.. Does that sound about right?
So im going to have a fitting running from the block into a hose. From that hose to the stock oil pressure sender and then attach a T.. Does that sound about right?
#4
Registered User
Idk if this well help or not, but this is how my setup is..Anodized T fitting is threaded right above the oil filter. GL
Blue piece (t-fitting)
braided line (oil sender)
silver sensor to the right (oil pressure gauge)
Blue piece (t-fitting)
braided line (oil sender)
silver sensor to the right (oil pressure gauge)
Trending Topics
#9
Originally Posted by s2k dre,Nov 12 2010, 02:54 PM
If ur using a mechanical gauge i dont think u need the oem sending unit. But im not sure if it will trigger the dummy light on the cluster.
Some one please verify