My turbo build list....
#1
Registered User
Thread Starter
Join Date: Aug 2007
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
My turbo build list....
Here is the list of parts I have ordered for my turbo build. Its kinda a mish mash of parts, but will be just as complete as any kit out there.
GT3076R .82 a/r
PFAB log manifold
PFAB 3" stainless downpipe
PFAB stainless Dumptube
Tial 50mm bov
Tial 38mm wastegate
AEM EMS 1052
Precision 750's
Walbro 255hp
PLX wideband
ACT HD clutch kit
GReddy Ti-C 80mm exhaust
Still need to order
Precision 600hp IC
AEM true-boost gauge/controller
IC pipes ( going custom here )
So I know i have everything I need and here is what I am wanting to do with it. I want one 93 octane map and then one 110 octane map. I have race gas available locally for 5 dollars a gallon. I was thinking 10-11psi on 93 and 15-16psi on the 110. How many people run stock compression and race gas at 1 bar of boost? I just want to make sure I can do this with stock compression safely. I am pretty sure 16psi is safe on 110 but just wanted to see if someone else is doing the same kinda thing I am.
I am hoping for about 360-380 on pump gas and 430-450 on race gas. Think its doable? Anyways, when I get some of these parts in ill throw down some pictures, but as of right now I have nothing to show for it...hehe.
GT3076R .82 a/r
PFAB log manifold
PFAB 3" stainless downpipe
PFAB stainless Dumptube
Tial 50mm bov
Tial 38mm wastegate
AEM EMS 1052
Precision 750's
Walbro 255hp
PLX wideband
ACT HD clutch kit
GReddy Ti-C 80mm exhaust
Still need to order
Precision 600hp IC
AEM true-boost gauge/controller
IC pipes ( going custom here )
So I know i have everything I need and here is what I am wanting to do with it. I want one 93 octane map and then one 110 octane map. I have race gas available locally for 5 dollars a gallon. I was thinking 10-11psi on 93 and 15-16psi on the 110. How many people run stock compression and race gas at 1 bar of boost? I just want to make sure I can do this with stock compression safely. I am pretty sure 16psi is safe on 110 but just wanted to see if someone else is doing the same kinda thing I am.
I am hoping for about 360-380 on pump gas and 430-450 on race gas. Think its doable? Anyways, when I get some of these parts in ill throw down some pictures, but as of right now I have nothing to show for it...hehe.
#3
Registered User
Thread Starter
Join Date: Aug 2007
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blkwidow,Apr 1 2008, 11:05 AM
Are you doing custom oil feed and return lines? Aftermarket Fuel Pressure Regulater?
#4
Registered User
Join Date: Jun 2005
Location: south east
Posts: 2,670
Likes: 0
Received 0 Likes
on
0 Posts
check out this thread might help, the manifold is not the same but the rest of the parts are nearly
https://www.s2ki.com/forums/index.ph...ic=568314&st=0
https://www.s2ki.com/forums/index.ph...ic=568314&st=0
#5
Registered User
Thread Starter
Join Date: Aug 2007
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phils2k,Apr 1 2008, 12:56 PM
check out this thread might help, the manifold is not the same but the rest of the parts are nearly
https://www.s2ki.com/forums/index.ph...ic=568314&st=0
https://www.s2ki.com/forums/index.ph...ic=568314&st=0
#7
Registered User
Thread Starter
Join Date: Aug 2007
Posts: 1,824
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AusS2000,Apr 1 2008, 01:57 PM
You'll be wanting to upgrade that MAP sensor too.