Kraftwerks high boost kit problem!
#1
Registered User
Thread Starter
Join Date: Aug 2010
Location: Yuma az
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Kraftwerks high boost kit problem!
I have 2007 ap2 and I recently bought the kraftsworks sc kit ( high boost) and runing into problems.. Whenever I floor it the rpms get stuck at 7k-7.5k at wot in all gears.. Please help what can it be??? Thanks no check engine light everything is stock just a stage 2 clutch kit
#2
Registered User
Join Date: Feb 2008
Location: LaVista, NE
Posts: 1,911
Likes: 0
Received 0 Likes
on
0 Posts
my SOS stage 1 did the same thing after i installed a new big bore TB. my car made no power past 7600 rpms and sounded like fuel cut off but engine kept revving. but anyways after leaving it alone and driving normal it went away. something tells me i needed to break in the TB but i dunno. i rev up to 8600 now
#6
.33 is what you should gap them to.
I was blowing out spark even with densos same as your above at the same rpm. The gap was at .43, but i was able to continue to redline it just felt weird.
I was blowing out spark even with densos same as your above at the same rpm. The gap was at .43, but i was able to continue to redline it just felt weird.
Trending Topics
#9
Registered User
Thread Starter
Join Date: Aug 2010
Location: Yuma az
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Yea I em thinking of the flash pro but I'm stock so I'm goin to have to wait til next yeaR what abt meth injection would that help me out. So 22 thou I'll try it
Thanks
Thanks
#10
kw hi boost kit doesnt need meth injection. blower is near max as it is. kw c30 blower is very efficient so you dont need the cooling properties.
just close the gap and enjoy.
just close the gap and enjoy.