First Time Turbo
#1
Registered User
Thread Starter
Join Date: Jun 2013
Location: Jacksonville, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
First Time Turbo
Going to start a build thread like everyone else. I have a 2005 S2k with 33k. Silverstone with red/black interior, all stock. This is my first time turbo, so if you notice something missing, let me know.
PFAB Topmount Twinscroll ELT manifold
PFAB Stainless steel downpipe
PFAB Stainless Steel dumptube
Garrett GTX3582R
TiAL 44mm wastegate
TiAL Q blow off valve
PFAB Stage 2 intercooler
PFAB Intercooler piping kit
PFAB High flow air intake & filter kit
PFAB Hardware kit
Turbo blanket
Heat shielding
QTP 3'' electric exhaust cutout
Hondata 3 BAR map sensor
AEM v2
ID1000 injectors
255LPH fuel pump
AEM UEGO kit
(2) Serial Data gauge
MAC boost control Solenoid
AP1 flywheel
CC stage 4, 6 puck sprung clutch
Used oil relocation kit and oil cooler from Japmuscle here on s2k
AEM Alloycraft bracket (https://www.s2ki.com/s2000/topic/102...nting-bracket/)
Aquamist HSF4 w/ AEM 1 gal tank
AC relocation kit from ghettocrxsi here on s2k
ARP intake and exhaust mani bolts
Ferrea Beehive springs and Ti retainers
AB-speed catch can
Various switches and Misc parts to connect everything
I'm wanting to hit 500+ with 93 octane on a boost by gear high tune and have something around 350 for my everyday driving.
Most of the parts are shipping now or within the next week, so I'm kind of at a stand still.
Question:
I know I can have a low/high boost setting. Can I have a 3rd tune for race fuel (there is a Sunoco 5 min from my house that sells 100 octane, and a VP fuel dealer 10min down the road) that would be saved under nitrous control? If so, can I run 100 octane (or VP101) on my set up without changing my components? Eventually I want a dual hanger fuel pump, change the rail, ID2000 and get a 68-70mm throttle body and intake manifold to match, boost a spark and coils, but that will be down the road (after drivetrain has been upgraded).
If anyone has any words of wisdom or advice to impart, I am all ears.
PFAB Topmount Twinscroll ELT manifold
PFAB Stainless steel downpipe
PFAB Stainless Steel dumptube
Garrett GTX3582R
TiAL 44mm wastegate
TiAL Q blow off valve
PFAB Stage 2 intercooler
PFAB Intercooler piping kit
PFAB High flow air intake & filter kit
PFAB Hardware kit
Turbo blanket
Heat shielding
QTP 3'' electric exhaust cutout
Hondata 3 BAR map sensor
AEM v2
ID1000 injectors
255LPH fuel pump
AEM UEGO kit
(2) Serial Data gauge
MAC boost control Solenoid
AP1 flywheel
CC stage 4, 6 puck sprung clutch
Used oil relocation kit and oil cooler from Japmuscle here on s2k
AEM Alloycraft bracket (https://www.s2ki.com/s2000/topic/102...nting-bracket/)
Aquamist HSF4 w/ AEM 1 gal tank
AC relocation kit from ghettocrxsi here on s2k
ARP intake and exhaust mani bolts
Ferrea Beehive springs and Ti retainers
AB-speed catch can
Various switches and Misc parts to connect everything
I'm wanting to hit 500+ with 93 octane on a boost by gear high tune and have something around 350 for my everyday driving.
Most of the parts are shipping now or within the next week, so I'm kind of at a stand still.
Question:
I know I can have a low/high boost setting. Can I have a 3rd tune for race fuel (there is a Sunoco 5 min from my house that sells 100 octane, and a VP fuel dealer 10min down the road) that would be saved under nitrous control? If so, can I run 100 octane (or VP101) on my set up without changing my components? Eventually I want a dual hanger fuel pump, change the rail, ID2000 and get a 68-70mm throttle body and intake manifold to match, boost a spark and coils, but that will be down the road (after drivetrain has been upgraded).
If anyone has any words of wisdom or advice to impart, I am all ears.
#2
Registered User
Join Date: Dec 2005
Location: huntington long island
Posts: 5,651
Likes: 0
Received 0 Likes
on
0 Posts
looks like a great start to me, you got pretty much everything written down u need, a catch can wouldnt be a bad idea, i would just run 2 tunes, pump gas tune and race gas tune
#6
Registered User
Thread Starter
Join Date: Jun 2013
Location: Jacksonville, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
The idea behind 3 tunes was to have an easy "everyday" driving tune, a higher boost by gear type set up for when I cruise with friends who have boost too or if someone wants to play but I am on pump gas and then a full out race tune for various track days and such. Are 3 tunes possible with AEM?
Also, regarding not meeting my goals on pump gas, I have been doing some looking and VP motorsports 109 (unleaded) isn't much more expensive than 100 unleaded. Anyone have any experience using this fuel? I would love to use e85 (I have seen some great results on here with people using it) but I don't want to completely redo the fuel system on my car just yet. Maybe a winter project in the future.
Also, regarding not meeting my goals on pump gas, I have been doing some looking and VP motorsports 109 (unleaded) isn't much more expensive than 100 unleaded. Anyone have any experience using this fuel? I would love to use e85 (I have seen some great results on here with people using it) but I don't want to completely redo the fuel system on my car just yet. Maybe a winter project in the future.
Trending Topics
#8
Originally Posted by passmans2kny' timestamp='1373040078' post='22648813
.... i would just run 2 tunes, pump gas tune and race gas tune
Also, regarding not meeting my goals on pump gas, I have been doing some looking and VP motorsports 109 (unleaded) isn't much more expensive than 100 unleaded. Anyone have any experience using this fuel? I would love to use e85 (I have seen some great results on here with people using it) but I don't want to completely redo the fuel system on my car just yet. Maybe a winter project in the future.
#9
Registered User
Thread Starter
Join Date: Jun 2013
Location: Jacksonville, FL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rugby_Guy' timestamp='1373064033' post='22649458
[quote name='passmans2kny' timestamp='1373040078' post='22648813']
.... i would just run 2 tunes, pump gas tune and race gas tune
.... i would just run 2 tunes, pump gas tune and race gas tune
Also, regarding not meeting my goals on pump gas, I have been doing some looking and VP motorsports 109 (unleaded) isn't much more expensive than 100 unleaded. Anyone have any experience using this fuel? I would love to use e85 (I have seen some great results on here with people using it) but I don't want to completely redo the fuel system on my car just yet. Maybe a winter project in the future.
[/quote]
Thank you. I am currently reading through your build thread as we speak. Good stuff in there. Military?