FBM / Avid racing Billet Motor Mounts
#111
I'm still waiting on my washers (and I guess updated brackets ) illestrolla, have you tried torquing the updated brackets without the billet mount inserted? Wonder if that will help straighten the brackets?
#112
I haven't torqued anything down at all.
Just because I knew something wasn't right I wanted to ensure I could still return them if it gets to that point.
If I snugged them down, no chance the washers would fit.
you can see in the pics above, I have a shot of the old bracket w/ only 1 washer, no chance id be able to get both in there.
#113
I apologize if this is a little off topic, but thought it related. One of the more common complaints with urethane (as compared to rubber) is its lack of elasticity and NVH dampening. Looking at this design, would it work using rubber suspension bushings? This way you get a firmer mount compared to liquid filled, yet still keep the nice properties of a rubber mount. I'd be willing to prototype/test it.
#114
Originally Posted by herecomesboost' timestamp='1336570898' post='21682324
I'm still waiting on my washers (and I guess updated brackets ) illestrolla, have you tried torquing the updated brackets without the billet mount inserted? Wonder if that will help straighten the brackets?
I haven't torqued anything down at all.
Just because I knew something wasn't right I wanted to ensure I could still return them if it gets to that point.
If I snugged them down, no chance the washers would fit.
you can see in the pics above, I have a shot of the old bracket w/ only 1 washer, no chance id be able to get both in there.
#115
Hey, guys how are you? This is Franklin from Avid Racing, we had a QC issue with our laser supplier after these had already shipped to LJ at Full Blown. We were in a huge rush to get these bad boys out and this had slipped passed our hands. I have already been in contact with Joe F. and trying to get in touch with Kyle. Today we'll be sending the brand new sets of mounts to each that had received them and getting the old ones back. We do apologize for this issue and we are taking care of it. We feel terrible that this had happened, but we always take care of our customers no matter what, we stand behind our products. LJ will be also repunished with new inventory heading his way. Once again we do apologize for inconvience and thank you for your understanding. Here's some cell phone pics that I took of the production ones.
#118
#120
Registered User
Join Date: Jun 2011
Location: Bay Area, CA
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
what the hell is going on here? so im getting washers from FBM aswell as some directly from AVID along with updated brackets that may or may not be the correct dimensions to support the use of the washers?
so does this end with everyone sending the brackets/washers/mounts theyve received back in return for complete, new, non-prototype mounts?
sorry if im coming across as a bit aggravated, but this is getting quite ridiculous
Today we'll be sending the brand new sets of mounts to each that had received them and getting the old ones back.
sorry if im coming across as a bit aggravated, but this is getting quite ridiculous