freshs2k

im planning to get some 680cc injectors local off of an srt4 can i run these will they fit? Are fuel injectors fuel injectors? i know i need the clips and harness for them but anything else? Im planning to do 10-12 psi will these injectors be to big? Or can i use some type of emanage to take away fuel? better to be to big than to small right?

stena

Plan to take the the 4.77 out if you Up the boost.
You need AEM EMS or the Newer AEM Piggy back and a good tuner.
All in all get ready to spend some more cash,
Cheers

freshs2k

Ill probably keep the 4.77 just to see how ridiculous it will be for a little bit. But I don't know if the 680's will be to much for 12 psi

freshs2k

Ill probably keep the 4.77 just to see how ridiculous it will be for a little bit. But I don't know if the 680's will be to much for 12 psi

AirborneS2K

How many CFMs will your CTSC be pushing @ 12 psi and how many lph can those fuel injectors push at say 75-85% duty? Figure that out and see if they are too much.

Also, freshs2k your car is confused as to if it is black or white, please help it out by painting.

freshs2k

Its gpw and carbon fiber ha! Now I gotta go about n find that info! Thanks

nightcrawler7188

can i get dibs if you decide to sell your 4.77s?? let me know!

freshs2k

I'm not selling them! I'm breaking them first.

nightcrawler7188

damn you freshs2k lol

freshs2k

they are cryo'ed so it might take awhile or ill run all the teeth off the gears with a few hard launches and some hard shifts with this 6 puck sprung act clutch.