clicking sound comming from the supercharger
#21
Registered User
Join Date: Nov 2002
Location: Bay Area
Posts: 1,233
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LORDNIKON0612,Apr 7 2005, 08:49 AM
i had the same problem,means bearings are bad they sent me out a new one pretty quick though...
#23
Registered User
Join Date: Apr 2007
Location: Lexington, Kentucky
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
Had to bring this back from the dead guys.
I have a CT aftercooled SC system on my MY01; 23,7XX miles on the car.
It was 48 degrees here today so I took the S out for a cruise.
At every light I would hear this loud ticking. I stopped by my buddies house and let the car idle while I listened. At first I thought it was the timing chain tensioner clicking, but the old screwdriver to ear trick lead me and my friend to believe that it is the SC belt tensioner pulley.
I guess it could be the SC, but it doesn't sound like it is coming from their.
Here is what I need to know:
1) How tight is too tight? I know the belt is supposed to be tightend to 20lbs of force
with .5" to .6" slack, but last fall I was losing boost so I replaced the belt, which
was slipping, and it was fine then. I guess I may have just overlooked the sound.
2) Xviper states that the tensioner pulley may be cocked or bent. Would this cause
this sound?
3) How are those pulleys made? Do they have needle bearings, which could be worn
causing the pulley to tick?
Or is it the Blower?
Thanks.
I have a CT aftercooled SC system on my MY01; 23,7XX miles on the car.
It was 48 degrees here today so I took the S out for a cruise.
At every light I would hear this loud ticking. I stopped by my buddies house and let the car idle while I listened. At first I thought it was the timing chain tensioner clicking, but the old screwdriver to ear trick lead me and my friend to believe that it is the SC belt tensioner pulley.
I guess it could be the SC, but it doesn't sound like it is coming from their.
Here is what I need to know:
1) How tight is too tight? I know the belt is supposed to be tightend to 20lbs of force
with .5" to .6" slack, but last fall I was losing boost so I replaced the belt, which
was slipping, and it was fine then. I guess I may have just overlooked the sound.
2) Xviper states that the tensioner pulley may be cocked or bent. Would this cause
this sound?
3) How are those pulleys made? Do they have needle bearings, which could be worn
causing the pulley to tick?
Or is it the Blower?
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post