The topic pretty much describes it. I am getting a great deal on an AP1 greddy kit for my AP2 (just have to get it tuned, can't use the F20 basemap) and I wanted to know what kind of boost controllers and BOV's you guys are using. I am seeing a lot of Profec b's, but wouldn't mind using a mechanical doost controller instead of electronic if possible. Also, do you have to make any wiring harness adjustments to make the AP1 kit work? I have seen some had to change some pins to work. Thanks guys!

Rich

 

I put in the AEM true boost, it is far from perfect but it is a nice all in one gauge and controller. For the bov I went with the Greddy Type S with the kit b/c they gave me a discount.

 

hks bov and greddy profecII controller

 

Greddy Profec B II EBC and Greddy Type RS BOV. I run both on my S and they work great!

 

I know the Greddy type RS is pretty loud, i'm looking for something a little quiter. How loud is the HKS sequential BOV? I was looking into that one. Also, can you safety change the boost 1 or 2 psi and keeping the stock AP2 basemap in the greddy emanage. It seems that the EMU comes locked with the turbo kits and they will not give you an unlocked basemap to tune with unless you mail in your CARB sticker, which I don't have (I bought the kit used). Thanks guys!

 

I have the same stuff and a AEM wide band

 

hks bov is pretty loud

 

Joe P boost controllers work great. Nothing wrong with a good 'ol ball and spring. 50bucks.

 

Rich, you have PM.

 

Thanks guys, I'm picking up Spec Ops Synapse BOV, but which Joe P boost controller would work the best? There seem to be a lot of them to choose from!

Thanks!